[fold]

i've tried these tools, all clones, without luck
carprog, galletto, kess2
Each of these recognizes ecu, so connection is good. Each fails during reading.
I had 3 ecus for testing.

Any ideas? Does your clone works with this ecu?

[snyper]

Closely following. Have the same ECU.Tried with DVDI, no joy, Carprog by obd brings pin code as yyyy.
Then decided to visit this forum, and saw you have the same problem. Hope you don't mind sharing my findings and we resolve this problem together.

I tried reading the dump files from the ECU.

---

i've tried these tools, all clones, without luck
carprog, galletto, kess2
Each of these recognizes ecu, so connection is good. Each fails during reading.
I had 3 ecus for testing.

Any ideas? Does your clone works with this ecu?

Try obd. I have a feeling SPS programming with Tech 2 bypasses the need for a code

[fold]

Try obd. I have a feeling SPS programming with Tech 2 bypasses the need for a code

I don't have Tech2. I'll try to borrow one.
I'm still curious how others do it, i have no luck becouse of clones ?

Anyway i'm doing it to learn something

[evgenijj]

Simply china carprog dont read this but reworked one yes.
Its tested for me.
And you can see in datastream the status immo for donor ecu-it may be already reseted.

[snyper]

Simply china carprog dont read this but reworked one yes.
Its tested for me.
And you can see in datastream the status immo for donor ecu-it may be already reseted.

How can i rework my carprog from China? Is there a fools tutorial guide to re-work the carprog, will be much delighted