Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
HUTOOL 2.6 missing file needed please!!
02-09-2019, 17:02 PM,
Post: #11
|
|||
|
|||
RE: HUTOOL 2.6 missing file needed please!!
(02-09-2019, 16:50 PM)blax123 Wrote: i mean for cars with factory fitted evo's/entrynav's Again, You cannot do anything with ENTRYNAV Head Unit. 2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|||
04-09-2019, 09:43 AM,
Post: #12
|
|||
|
|||
RE: HUTOOL 2.6 missing file needed please!!
how to activate a NBT Unit with generated FSC's from HU Tool 2.6?
Like CIC? First patch it with the .BIN which is generated during FSC Generting? Stick with Patch to USB in Center Console wait 30 sec. remove stick manually restart with tool32 after approx. 1 min. automatic restart and then import SIG/DER/FSC with E-Sys? |
|||
04-09-2019, 10:04 AM,
Post: #13
|
|||
|
|||
RE: HUTOOL 2.6 missing file needed please!!
Hello!
First at all, code the NBT with the correct VIN and insert the long vin via E-Sys. When you load the FSC set via USB on the NBT everything is done. No need to load any sig.der. The next step is to start navigation and type in the FSC (also generated). Done. CU Oliver |
|||
04-09-2019, 10:58 AM,
Post: #14
|
|||
|
|||
RE: HUTOOL 2.6 missing file needed please!!
(04-09-2019, 10:04 AM)milkyway Wrote: Hello! I know normally the USB Activations got around 2-3MB on the .BIN File. The .BIN generated with HU Tool 2.6 only got 40KB. So i thought i have to patch it with the 40KB file and manually import the SIG/DER/FSC's? Or will the 40KB File do all the Job? |
|||
04-09-2019, 11:26 AM,
Post: #15
|
|||
|
|||
RE: HUTOOL 2.6 missing file needed please!!
on my car, i made it work by loading manually with esys all certificates/fscs afert i've rebooted the unit.
hutool 2.6 pre used. no automatic process behind. |
|||
04-09-2019, 11:32 AM,
Post: #16
|
|||
|
|||
RE: HUTOOL 2.6 missing file needed please!!
|
|||
04-09-2019, 12:14 PM,
Post: #17
|
|||
|
|||
RE: HUTOOL 2.6 missing file needed please!!
Exactly. That was the process
|
|||
24-06-2022, 15:46 PM,
Post: #18
|
|||
|
|||
RE: HUTOOL 2.6 missing file needed please!!
|
|||
24-06-2022, 16:34 PM,
Post: #19
|
|||
|
|||
RE: HUTOOL 2.6 missing file needed please!!
(24-06-2022, 15:46 PM)manhthanphong Wrote:Hutool 2.6 Just click and use software with no installation required(02-09-2019, 15:45 PM)HU_man Wrote:(02-09-2019, 12:05 PM)blax123 Wrote: how to use it for map update EVO/Route?Make new folder name FSC in usb contained map data, copy map fsc file to that folder. Plug to car and auto update will start. Retrofit success 2VB,2TB,248,5AC,5AG,5AT,5AR,5DL,5DP,609,688,6AK,6CP,6NS,6WB,610,710,8TH
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content