Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. New Emulator

  2. Immo Bypass

  3. Julie Emulator

  4. AUTO-CHIPS

  5. Ecu-Service



program ecu abs - Error 31: Request out of range - Coding Rejected
01-09-2019, 19:11 PM,
Post: #1
program ecu abs - Error 31: Request out of range - Coding Rejected
I need to change the abs module on audi A4 2012 (8K0)

original module has the reference 8k0 907 379 CH the used is 8k0 907 379 CE.

When I try to do the encoding (original is 16DD4C and used is 161DCC01) from me Error 31: Request out of range - Coding Rejected.

Workshop code 06335
Importer Number - I tested several values ...
Equipment Number - I tested several values ...
Quote this message in a reply
02-09-2019, 04:32 AM,
Post: #2
RE: program ecu abs - Error 31: Request out of range - Coding Rejected
Try the following and report.
16DD4C00

Also don't we need to remove CP??

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Reputation: +1 - fcarocha [+1]
Quote this message in a reply
[+] 1 user says Thank You to apoelistas for this post
02-09-2019, 17:04 PM,
Post: #3
RE: program ecu abs - Error 31: Request out of range - Coding Rejected
what is cp?

I will test the code
Quote this message in a reply
02-09-2019, 17:35 PM,
Post: #4
RE: program ecu abs - Error 31: Request out of range - Coding Rejected
component protection
Quote this message in a reply
[+] 1 user says Thank You to aka99 for this post
02-09-2019, 17:48 PM,
Post: #5
RE: program ecu abs - Error 31: Request out of range - Coding Rejected
ABS in B8 has no CP ..

The problem here is that new module is not the same as the old one ,has different software version and the coding might be not the same.

Even the number of bytes is not the same.

I would try : 16DD4C01
Reputation: +2 - aka99 [+1] , fcarocha [+1]
Quote this message in a reply
[+] 2 users say Thank You to MarcinOslo for this post
02-09-2019, 18:12 PM,
Post: #6
RE: program ecu abs - Error 31: Request out of range - Coding Rejected
For ABS if I remember well a user has coded the module with Odis-e successfully. Has some additional selections that are only available with Odis-e. If you fail with VCDs try Odis-e. There was a thread....

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
04-09-2019, 17:51 PM,
Post: #7
RE: program ecu abs - Error 31: Request out of range - Coding Rejected
Odis-e will do the job, it has some options on coding section and makes it easier to code, especially now that you have factory coding. You can wow it on odis-e and check in which byte there is the out of range.

ABS doesn't have CP till now
Quote this message in a reply
[+] 1 user says Thank You to kostas-k for this post
04-09-2019, 20:27 PM,
Post: #8
RE: program ecu abs - Error 31: Request out of range - Coding Rejected
work with 16DD4C00 and 16DD4C01 (the correct one. Now I have error in tmps). I want to ride the car to test, then give feedback
Quote this message in a reply
05-09-2019, 18:40 PM,
Post: #9
RE: program ecu abs - Error 31: Request out of range - Coding Rejected
it will not work, it must be a letter equal to or greater than yours. You have the hardware number?
Quote this message in a reply
05-09-2019, 21:16 PM,
Post: #10
RE: program ecu abs - Error 31: Request out of range - Coding Rejected
Original is 8k0 907 379 CH
used is 8k0 907 379 CE
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Q7 Sunroof Module CA Firmware Request andyhud 2 382 20-09-2019, 11:30 AM
Last Post: andyhud
ZVW ETKA 8.1 registration FIX and Hardlock error DLL.2.00 Fehler 7 FIX johmn1978 9 3,123 10-09-2019, 23:50 PM
Last Post: greg57
ZSkoda fabia 3 coding BobbySD 1 162 08-09-2019, 22:30 PM
Last Post: ruisam
ZSkoda NEEDED SKODA SUPERB 2010 ABS CODING peter_pan 1 131 07-09-2019, 19:05 PM
Last Post: ototest
  ODIS-E 10.0.0 program installation macarp 6 1,029 03-09-2019, 19:46 PM
Last Post: aka99
ZVW VAS5054A ODIS-E 7.2.3 - "no valid flash session" error alex_mihalciuc 0 160 31-08-2019, 08:32 AM
Last Post: alex_mihalciuc
ZVW Error when trying to activate Driving Mode fec andreamap 10 373 27-08-2019, 12:51 PM
Last Post: kreativ
ZVW Tiguan AD1 error B130E00: Function limitation, pause recommendation greenhorn 0 107 25-08-2019, 12:08 PM
Last Post: greenhorn
ZSeat seat ibiza 2009 ABS 8.2 long coding please help me jokerk78 3 168 22-08-2019, 19:51 PM
Last Post: ototest
ZTAudi Need original ABS coding for S3 8V Rainesh 4 499 16-08-2019, 16:24 PM
Last Post: cgl

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content