Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ VAS5054A with Nissan Consult Plus as Passthru
14-10-2015, 06:26 AM,
Post: #21
|
|||
|
|||
RE: VAS5054A with Nissan Consult Plus as Passthru
Work on all models or only 2008>>>. ????
|
|||
11-12-2015, 15:17 PM,
Post: #22
|
|||
|
|||
RE: VAS5054A with Nissan Consult Plus as Passthru
|
|||
20-12-2015, 06:40 AM,
Post: #23
|
|||
|
|||
RE: VAS5054A with Nissan Consult Plus as Passthru
Hi,
which operating system using. if 32bit not fail to install. |
|||
27-12-2015, 04:30 AM,
Post: #24
|
|||
|
|||
RE: VAS5054A with Nissan Consult Plus as Passthru
Hello everyone, I would like to ask this to insatall it?
I am now the case is a successful installation, 5054A diagnosis connector is also tested successfully ,but it is not connected to the VI, can not be registered on the 5054A serial number is nine,but VI inconsult registration is 7, and my computer did not find PASSTHRU, donot know whether the need to reinstall the program? |
|||
31-12-2015, 17:33 PM,
Post: #25
|
|||
|
|||
RE: VAS5054A with Nissan Consult Plus as Passthru
Hello Fantomel may you explain how i do the obd2 dongle because a dont understand the pics otherwise why is nesessary? thank you
|
|||
26-12-2018, 02:51 AM,
Post: #26
|
|||
|
|||
RE: VAS5054A with Nissan Consult Plus as Passthru
Hello all,
I need some assistance cant connect: I have Vas5054A interface and I didn't use an obd2 adapter to achieve the connection I made the following: 1. Cut the connection between main board and odb2 connector related to pins 1 and 8 2. Made a bridge/joint with a cable: Pin 8 from obd2 to pin 1 from main board I saw that the only difference between VAG and Nissan OBD is the KL15 related to pin 1 and 8 When I open the Nissan consult I just get one interface: VI 1234567 as showed into the attachment I made the changes into registry as described into the files Hope someone help me Thanks in advance |
|||
02-01-2019, 13:00 PM,
Post: #27
|
|||
|
|||
RE: VAS5054A with Nissan Consult Plus as Passthru
Hello,
Could someone help me please? |
|||
09-01-2019, 04:08 AM,
Post: #28
|
|||
|
|||
RE: VAS5054A with Nissan Consult Plus as Passthru
|
|||
01-08-2019, 06:29 AM,
Post: #29
|
|||
|
|||
RE: VAS5054A with Nissan Consult Plus as Passthru
Hello for nissan micra k12 i have to use the adapter to work with vas5054a?Thanks a lot
|
|||
03-09-2019, 07:27 AM,
Post: #30
|
|||
|
|||
RE: VAS5054A with Nissan Consult Plus as Passthru
Hi friends
Thank Fantomel for the job and sharing. The instructions have been followed and everything is ok except the driver When i insert the VAS5054 for the first time after installing the drivers and software, the pc indicate "driver not found" in the test i have error 31 and 30, i do not understand why the VAS5054 is not recognized. Please have you a tip to remedy this problem ? Big thanks in advance. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Consult doubt mib2 | MORKAS | 2 | 92 |
30-01-2024, 22:40 PM Last Post: BIMMERSIMBA |
|
Odis S 7.2.1 + E 12.2.0 for Vas5054a Win10 Updated2023 Vmware | srzar | 3 | 876 |
20-01-2024, 16:23 PM Last Post: lalle |
|
Drivers VAS5054A blue | MORKAS | 1 | 280 |
28-12-2023, 22:46 PM Last Post: vagvag |
|
VAS5054A PassThru drivers | audi666 | 6 | 413 |
22-12-2023, 09:46 AM Last Post: audi666 |
|
VAS5054A clone drivers HELP | Dišovas | 4 | 822 |
13-09-2023, 10:31 AM Last Post: Peterwall |
|
Spotting a good VAS5054a clone interface in 2023 | Yonder | 9 | 859 |
29-08-2023, 08:32 AM Last Post: audi666 |
|
Vmware image VAS5054 passthru | estrika | 1 | 710 |
15-08-2023, 11:45 AM Last Post: VASCO.EAU |
|
Latest Odis S and E versions that work with VAS5054A? | getaibose | 8 | 1,012 |
22-07-2023, 17:30 PM Last Post: audi666 |
|
-VAS5054-PassThru-Drivers-@-64bit- | Roturbo | 90 | 42,325 |
19-07-2023, 21:30 PM Last Post: Venigo^ |
|
VAS5054A w. PassThru and Odis | Projectns | 4 | 942 |
03-07-2023, 11:56 AM Last Post: aaronpaul |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content