[Tomate]

BMW_STAGE_2.rar
File Type:
Downloaded:	5 times
Size:	370.05 KB

hello,
i need some help from you experts! could somebody please check my stage 2 file? it is for my own car. my hardware modifications are dpf off (downpipe), big intercooler, optimized air-intake mainfold and railpressure sensor up to 2000bar. i drove long time a stage 1, step by step i made rail and turbo pressure higher, drove over 150.000km with my files without problems but how you all knew there is never enough power. with my last file i had error code 
P3004 (rail pressure to high..) while driving maximum load for longer time. that is first time i have an error code with my own files. now i had made a new file and it would be realy nice if somebody could have a look at it and help me with it if it is not ok.

[loki954]

you should post always the original file as well

[Tomate]

BMW e61 530d original file.rar
File Type:
Downloaded:	4 times
Size:	370.4 KB

ok! that is the original file. read with kess clone and rework with ecm.

[loki954]

driver wish missed,fuel quantity limiter missed,fuel injected missed, torque limiter missed, egr not closed

[Tomate]

Thank you for your answer!
Did i use wrong driver? or do i have to supply my driver? i`m not sure how to see these limiters and these fields..
or is it defective data?
is egr closed completly with the largest nummerical value?
somehow the value 12000 haunts my head, but I'm not sure.
I hope I do not bother with my beginner questions
Regards

[loki954]

You should close egr by hysteresis. Use winols or if you have original ecm should find the missing things

[Tomate]

I already tried to work with winols a few times, but so far without success. just did not get it right ...

But I think you're right and I'll start a new attempt immediately. Thanks