Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
No Service Functions in ISTA Standalone/ISTA_4.19.1x
05-09-2019, 04:21 AM,
Post: #1
|
|||
|
|||
No Service Functions in ISTA Standalone/ISTA_4.19.1x
Hi! I installed the software and scanned my 2007 E70 using a KDCAN cable/Win 8 laptop... Am only able to pull up VIN and modules, but all service functions appear to be blank. Am I missing a database file or need a different cable? Also I noticed one of my modules _0xA9 is showing up red. Is that why further function can't be done? Thanks.
|
|||
05-09-2019, 05:19 AM,
Post: #2
|
|||
|
|||
RE: No Service Functions in ISTA Standalone/ISTA_4.19.1x
Is the background process... completed? If not that why other function is grayed out.
Did you select "Control unit list" to see which module not communication? Also check your vehicle to make sure "Check control Okay", sometime new software bug or the D-CAN issue. |
|||
05-09-2019, 12:06 PM,
Post: #3
|
|||
|
|||
RE: No Service Functions in ISTA Standalone/ISTA_4.19.1x
I am not able to get any service functions past the module list (I need to do steering wheel adjustment). Is there a specific database I need?
|
|||
05-09-2019, 12:26 PM,
Post: #4
|
|||
|
|||
RE: No Service Functions in ISTA Standalone/ISTA_4.19.1x
Do you use my voltage control? Probably not though as voltages are not shown. But similar effect happens when some files are not signed properly. I suggest you try to copy installation files over.
|
|||
05-09-2019, 12:30 PM,
Post: #5
|
|||
|
|||
RE: No Service Functions in ISTA Standalone/ISTA_4.19.1x
I will try to find the voltage control today
|
|||
05-09-2019, 12:38 PM,
Post: #6
|
|||
|
|||
RE: No Service Functions in ISTA Standalone/ISTA_4.19.1x
Its not because of voltage control. I just noticed similar effect while developing it. When using unsigned files.
|
|||
05-09-2019, 13:38 PM,
Post: #7
|
|||
|
|||
RE: No Service Functions in ISTA Standalone/ISTA_4.19.1x
|
|||
05-09-2019, 15:11 PM,
Post: #8
|
|||
|
|||
RE: No Service Functions in ISTA Standalone/ISTA_4.19.1x
Service functions work for me.
|
|||
11-10-2019, 16:47 PM,
Post: #9
|
|||
|
|||
RE: No Service Functions in ISTA Standalone/ISTA_4.19.1x
Hello Node. Now that I installed Voltage Control my Ediabas is not detecting my car via Kdcan. When I open Inpa it also doesn't work. When I revert all files, back to point A, no service functions
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ISTA+ Licenserequest 4.45.30 | B O S S | 10 | 296 |
8 minutes ago Last Post: vagrom |
|
ISTA Standalone Licenserequest up to v4.37.4x | Sedoy | 8,709 | 662,955 |
2 hours ago Last Post: Sedoy |
|
BMW Service history by VIN | bmt_hr | 6,123 | 503,206 |
2 hours ago Last Post: DieStream |
|
ISTA 4.47 test plan not available on M3 | bmwm3power | 3 | 70 |
4 hours ago Last Post: 2013m5 |
|
ISTA+ 4.47.1x Install Files - MEGA | shawnsheridan | 12 | 1,367 |
8 hours ago Last Post: shawnsheridan |
|
ista 4.46 Standalone | kiranabc | 84 | 10,536 |
11 hours ago Last Post: kiranabc |
|
ISTA 4.46.xx problems and possible solution | Sedoy | 97 | 11,617 |
25-04-2024, 11:38 AM Last Post: vld |
|
ISTA 4.47.1x I-LEVEL+OVERVIEW | AutoExe3219 | 0 | 238 |
24-04-2024, 22:52 PM Last Post: AutoExe3219 |
|
F10 0610 P2 timeout on Service DSC | redog4dy | 0 | 39 |
22-04-2024, 11:38 AM Last Post: redog4dy |
|
[MEGA] ISTA 4.32 // ISTA-P 3.72 + ALL LOADER up to 6.6 // no license needed | hashtagmaster | 61 | 18,378 |
21-04-2024, 22:17 PM Last Post: grizzle |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content