[rugina]

hi.please can anybody help me with esys error?i want to flash zgw module on my f10 car...and i have this error ..
Read SVT before TAL execution started.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
[MULF - 55] Could not read ComParam 'MODE_CHANGE_PARAMETER'. Maybe the template is too old. [WARN]
[MULF - 55] - [Exception] Code=49184, CodeDescription='Object with name not found', Severity=2051, VendorCode=3, VendorCodeDescription='provided name MODE_CHANGE_PARAMETER doesn't map to an item'
[MULF - 55] Could not read ComParam 'IDR_REQUIRED_BEFORE_FLASH'. Maybe the template is too old. [WARN]
[MULF - 55] - [Exception] Code=49184, CodeDescription='Object with name not found', Severity=2051, VendorCode=3, VendorCodeDescription='provided name IDR_REQUIRED_BEFORE_FLASH doesn't map to an item'
[MULF - 55] Could not read ComParam 'SUPPORTS_OPTIMIZED_BTLD_UPDATE'. Maybe the template is too old. [WARN]
[MULF - 55] - [Exception] Code=49184, CodeDescription='Object with name not found', Severity=2051, VendorCode=3, VendorCodeDescription='provided name SUPPORTS_OPTIMIZED_BTLD_UPDATE doesn't map to an item'
ExecutionID=2019/09/06-02:14:47.989
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] null [THROWABLE]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForFlash started [PROGRESS]
MCDDiagService<id=116600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=CDCS_FS_SPERREN, description=error: negative response : serviceNotSupported, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
[] prepareVehicleForFlash finished [PROGRESS]
[] null [THROWABLE]
[] finalizeVehicleFlash started [PROGRESS]

[hojo29]

The error comes because you have no Mulf installed.
If so, the mulf must be removed at SVT_SOLL and recalculated.

[rugina]

please can u say me how remove from svt soll?

[DayvG]

After calculation of svt.soll, click edit, find MULF, delete, save, then ensure new svt.soll is loaded and calculate TAL. There are only so many buttons you can press and places where you can edit/save things. Read the ECU flash guide over and over again until you actually understand what you are doing.

[hojo29]

please can u say me how remove from svt soll?

If you go right to SVT_SOLL edit

[rugina]

Ok..i did IT... I delete from svt_soll , save , load again, i click on tal calculate , then save tal, but when i click on edit tal i find mulf module in talline..It îs relevence? Or dont matter?

---

I repeat process ...same shit

[hojo29]

You can try to flash.
But first you should check the software availability.
I hope you do with an ICOM and charger the whole thing.

[DayvG]

Ok..i did IT... I delete from svt_soll , save , load again, i click on tal calculate , then save tal, but when i click on edit tal i find mulf module in talline..It îs relevence? Or dont matter?

---

I repeat process ...same shit

Remove MULF from SVT.IST as well and try.

[tokarszczak]

Can help remotely.