[smartking]

HELLO EVERYONE
I HAVE AN OPEL ASTRA J 2013, SOMEONSE TRY TO CHANGE BCM AND NOW THE CAR IS NOT STARTING, GOT ENGINE POWER LOSS AND ANTI THEFT SYSTEM, TRY TO PROGRAM WITH MDI BUT THE SAME., TRY TO PROGRAM KEY WITH XTOOL AS WELL.
CAN SOME ONE CHECK THE ECU FILE AND BCM PLEASE
HW: 12647136
SW: 12646746
VIN nr.: W0LPE6EC2C8063384
SW ver.: G12049
Spare: 
Engine: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
HW Ver.: 86AA4RK01333H7QK
SW upg.: 55589466

THANKS 
REGARDS

[dil6222]

Hello its because  bcm needs coding in scan BCM and ECU for faults codes and post them here this will help solve your problem

[smartking]

Hello its because  bcm needs coding in scan BCM and ECU for faults codes and post them here this will help solve your problem

when i put old bcm , i don`t get engine power loss fault but i got p0633- key not program.
on bcm i got b 389a and b151d
on electronic brake module i got immobiliser unindentified fault

[dil6222]

Hello its because  bcm needs coding in scan BCM and ECU for faults codes and post them here this will help solve your problem

when i put old bcm , i don`t get engine power loss fault but i got p0633- key not program.
on bcm i got b 389a and b151d
on electronic brake module i got immobiliser unindentified fault

Ok I'm pretty sure that the electronic brake module fault is because key is not programmed on your old bcm i wouldn,t  worry too much about this should disappear when you solve bcm issue.

 i would try reprogram old bcm back then with a new key have you tried this ?    then clear and rescan units and see what faults you have left keep me posted

[raffy haddad]

At least push the thanks button and reputation for dil6222 for helping guiding you

[klisenko]

hello i have the same situation how can i resolve that
does anyone can help me astra j 2013 bcm i have error in bcm about eeprom configuration and software
klisenko