Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Newest Version Of Op-Com For Clone
07-09-2019, 21:28 PM,
Post: #1
KVauxhall  Newest Version Of Op-Com For Clone
Hi Guys

I've been using op-com version 120309a + 131223d for a while now without any problems.

The trouble is that the engine measuring blocks does not work with engine codes that start with 
A (A14xep, A14XER....etc) only Z .

I asked on another forum about updating it and the response was that it depends on my interface (i have a good quality clone).

I then started receiving a lot of pm;s from people saying they can update it to the latest version for a fee.


Now i've seen a few interfaces that say they they are updatable with genuine MCU, FTDI...etc but they still seem to come with old software, some even older than the one i'm using.


So my question is, what is the latest free downloadable software i can get to run with this interface ?

I really need to be able to see the measuring blocks for the A engine codes sad
Quote this message in a reply
07-09-2019, 21:35 PM,
Post: #2
RE: Newest Version Of Op-Com For Clone
M8 if u know a little history, you should know that you use now a mix of files made by user Fantomel and published here as test files, test installer that china took and sold all interfaces with it.
My 2 cents, speak with him and he will help you out as he knows more then many around here.

If you think i helped you please do take 1 second and press THANKS button thumbsup
Quote this message in a reply
[+] 1 user says Thank You to justdiag for this post
07-09-2019, 21:55 PM,
Post: #3
RE: Newest Version Of Op-Com For Clone
(07-09-2019, 21:35 PM)justdiag Wrote:  M8 if u know a little history, you should know that you use now a mix of files made by user Fantomel and published here as test files, test installer that china took and sold all interfaces with it.
My 2 cents, speak with him and he will help you out as he knows more then many around here.

Thanks for the reply


To be honest i've done quite a bit of reading on different forums but i'm not sure what you mean.

But i do know that fantomel knows his stuff.

Do you mean the 120309a versions with updated databases ?

I have just remembered that i did have have a modified 2016 version of op-com but i had the same problems with the engine measuring blocks n the "A" engine code.
Quote this message in a reply
08-09-2019, 05:57 AM,
Post: #4
RE: Newest Version Of Op-Com For Clone
Mate if you have a china clone with an original MCU ( PIC18F458 ) then you have to know that you can upgrade and downgrade the firmware so in this case ypu can use any opcom/vauxcom versions no matter thar are cracked or originals.
All you need is an activation.
The last free version is vauxcom 120309a
And as you read in a previos post Fantomel added databases from newer versions. But you will can use only what 120309a is cover and nothing more. The 120309+131223 or 120309+160115a are fakes.
All the other newer cracked or original versions aren't for free.


Good luck
Quote this message in a reply
[+] 2 users say Thank You to mattydr67 for this post
09-09-2019, 00:20 AM,
Post: #5
RE: Newest Version Of Op-Com For Clone
(08-09-2019, 05:57 AM)mattydr67 Wrote:  Mate if you have a china clone with an original MCU ( PIC18F458 ) then you have to know that you can upgrade and downgrade the firmware so in this case ypu can use any opcom/vauxcom versions no matter thar are cracked or originals.
All you need is an activation.
The last free version is vauxcom 120309a
And as you read in a previos post Fantomel added databases from newer versions. But you will can use only what 120309a is cover and nothing more. The 120309+131223 or 120309+160115a are fakes.
All the other newer cracked or original versions aren't for free.


Good luck



Thanks 

Do you know where I would find one with fantomel's most recent database as it may contain what's needed for the "A" engine codes?
Quote this message in a reply
09-09-2019, 05:47 AM,
Post: #6
RE: Newest Version Of Op-Com For Clone
Maybe I wasn't such a clear to you mate. Adding new databases will not help you at all. You need new real software versions but not new database.
Good luck
Quote this message in a reply
[+] 2 users say Thank You to mattydr67 for this post
10-09-2019, 02:40 AM,
Post: #7
RE: Newest Version Of Op-Com For Clone
(09-09-2019, 05:47 AM)mattydr67 Wrote:  Maybe I wasn't such a clear to you mate. Adding new databases will not help you at all. You need new real software versions but not new database.
Good luck

Oh ok thanks 


Is there any known good sellers? 

Also what sort of price is activation?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
KOpel REPAIR ERASED OP-COM CLONE BOOTLOADER FROM PIC18F458 MCU fantomel 190 133,500 17-11-2023, 12:03 PM
Last Post: mattydr67
KOpel Mongoose Pro GM II CLONE - where to buy? alpntrb 4 1,210 26-05-2022, 11:08 AM
Last Post: ksv
  Opcom Motherboard version (can't find USB drivers) BrainBT 5 1,364 17-10-2019, 17:18 PM
Last Post: skyline
KHolden Tech 2 China Clone mototrampek 2 863 25-09-2019, 19:11 PM
Last Post: mototrampek
  opcom clone need help to repair autosolutions 1 815 18-09-2019, 02:40 AM
Last Post: mattydr67
KOpel Vaux Com 2016 Clone fatihk01 1 2,927 08-07-2018, 19:18 PM
Last Post: mattydr67
KOpel GM MDI Software v8.3.103.39 newest abcd100 0 1,505 28-04-2017, 08:00 AM
Last Post: abcd100
1GM SPS V. 3.0.85 = newest version? GM EV1 1 2,034 04-11-2016, 20:36 PM
Last Post: drovid
KVauxhall Best place to buy High Quality Tech 2 Clone Click4 5 2,920 22-05-2016, 15:06 PM
Last Post: faraday
  Tech2 clone jacko47 9 4,479 04-05-2016, 12:41 PM
Last Post: jacko47

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content