[Florissilfhout]

Hi,

I am looking for information on how to retrofit keyless entry on F30 (VIN: A694947). I have found i would need the following items:

1x NEW FEM max from BMW programmed to your FIN 9 868 380
3x outside aerials 9 220 831 with costum wiring to FEM
1x inside aerial 9 220 832 with bracket 9 180 196 and costum wiring to FEM
1x ECU smart opener 7 422 700
1x Sensor upper SO 7 391 042
1x Sensor lower SO 7 391 043
7x plug 8 133 466
1x door handle LH with light package 7 326 917
1x door handle RH with light package 7 326 918
1x supporter LH (dont know if this is the correct english word) 7 380 547
1x supporter RH 7 380 544
+ costum wiring from door handle to FEM or new door looms

The main question, is the currently installed FEM good enough? It doesn't say MID or MAX or HIGH.
If anyone has more helpful information, please reply

[gongaho]

It seemed that your FEM is OK for CA, there is no need for you to replace the FEM, great news!

[Jartsa]

Anyone done same retrofit on f11?

[maninblack]

It seemed that your FEM is OK for CA, there is no need for you to replace the FEM, great news!

What information on this picture tells you, that the fem is CA ready?

[gongaho]

ZB FEM LEAR V12. It is different with normal MID or HIGH or MAX, but someone with this FEM had successfully done for the CA.

It seemed that your FEM is OK for CA, there is no need for you to replace the FEM, great news!

What information on this picture tells you, that the fem is CA ready?