[counder2000]

W219 CLS350  the problem sometime wont crank . but with the key on position dirrect a wire supply to starter it cranks and start .   
no fault code at ecu , eis ,egs and front sam .  
change starter relay at front sam .and try change front sam also same . 
is it the problem at eis 
please any members can help me 
advance thanks

[evgenijj]

See datastream in DAS. Status kl50 output at the moment thats want start.

[counder2000]

See datastream in DAS. Status kl50 output at the moment thats want start.

yes when crank on i attached the image before and when crank

[evgenijj]

Check wiring for starter relay in front SAM.
And fuse of course.

[counder2000]

Check wiring for starter relay in front SAM.
And fuse of course.

thanks for reply 
checked
 i attached what i check i checked .
i also change a used front sam also same

[mercis]

switch inside aut.gear 722,9

[counder2000]

switch inside aut.gear 722,9

thnaks for reply 
but when i diagnostic EGS no fault code and in live data show the lever position

[mercis]

test start on P and N position,star dont see this problem

[Dionysus]

I have seen this before. The oil temp pid will only show in drive and reverse when working correctly. Look for the starter lockout pid as well. On the E-Class I was working on the conductor plate had failed.