Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F11 5AG coding issues
12-09-2019, 12:57 PM,
Post: #1
|
|||
|
|||
F11 5AG coding issues
Hi
I have retrofitted 5AG option to my BMW F11 (04/2012). I have fitted vibration motor, high mirrors, fitted control panel on the dash, replaced ZGW to HIGH version and installed two radars (master and slave) behind rear bumper. All wired and coded. Tested vibration, control panel on the dash and mirrors triangle via ISTA/D all working fine. HC2 modules showing in e-sys (after opening FlexRay port via Tool32). Problem I’m having is that I cannot inject CAFD in to HC2 module. "Detect CAF for SWE” option generates error message (see picture attached ). I was trying with PsdzData 4.18.32 Lite with e-sys 3.30.1 + Launcher PRO v 2.8.1 and e-sys 3.27.1 + Launcher PRO v 2.8.1. No luck the same error message. Thanks |
|||
12-09-2019, 13:39 PM,
Post: #2
|
|||
|
|||
RE: F11 5AG coding issues
(12-09-2019, 12:57 PM)filipq Wrote: Hi Calculate TAL and Flash it if you can't Detect CAFD. Coding 2.0 File Service - Region Change/Typekey
BMW Full FSC Set + CarPlay - NBT EVO ID4/5/6/ENTRYNAV2 (CP REMOVE/PATCH) MGU CARPLAY/ANDROID AUTO Activation / MGU PATCH/CP REMOVE (EU service) ISN RESET Remote F/G series BMW KAFAS 2/4 FSCs(7E/BE/BF - 11F/13E/13F) BMW KAFAS4/MRR/RAM Virgin / VIN FSC Matching |
|||
12-09-2019, 13:46 PM,
Post: #3
|
|||
|
|||
RE: F11 5AG coding issues
Hi dasi
Getting below error when try to flash. Any ideas? TAL execution started. ExecutionID=2019/09/12-10:42:08.326 [HC2 - 8] - [Exception - HC2 - 8] SVK-Ist does not match expected SGBMIDs for ecu ECUId:HC2_0x08. Excpected (relevant process classes only): [hwel_0000015c-004_000_004], Actual (relevant process classes only): [hwel_0000015c-005_000_000], Missing SGBMID(s): [hwel_0000015c-004_000_004], Surplus SGBMID(s): [hwel_0000015c-005_000_000] TAL-Execution finished with status: "FinishedWithError". [C207] TAL execution finished. Duration: "1min 3s". [C206] Thanks |
|||
12-09-2019, 13:50 PM,
Post: #4
|
|||
|
|||
RE: F11 5AG coding issues
Show your SVT after calculation
Coding 2.0 File Service - Region Change/Typekey
BMW Full FSC Set + CarPlay - NBT EVO ID4/5/6/ENTRYNAV2 (CP REMOVE/PATCH) MGU CARPLAY/ANDROID AUTO Activation / MGU PATCH/CP REMOVE (EU service) ISN RESET Remote F/G series BMW KAFAS 2/4 FSCs(7E/BE/BF - 11F/13E/13F) BMW KAFAS4/MRR/RAM Virgin / VIN FSC Matching |
|||
13-09-2019, 04:29 AM,
Post: #5
|
|||
|
|||
RE: F11 5AG coding issues
For injection and flashing, do without launcher.
Try with E-sys 3.33.4. For flashing, 'does not match expected SGBMIDs' means you selected incorrect I-Step shipment. |
|||
13-09-2019, 05:43 AM,
Post: #6
|
|||
|
|||
RE: F11 5AG coding issues
Correct, you need to select correct I-step shipment.
You have used modules, so it's shippment level can be different then yours car. If you know details aboute car from with you buy modules it will be simple. If you dont know, u need to try select every I-step shippment, calculate and see if all files are black near HC2, if red or blue, try different I-step If I helped, please magic buttons thx+rep
|
|||
13-09-2019, 09:22 AM,
Post: #7
|
|||
|
|||
RE: F11 5AG coding issues
(12-09-2019, 13:50 PM)dasi Wrote: Show your SVT after calculation Hi dasi I was able to flash it last night using instructions from this https://www.bimmerfest.com/forums/showth...?t=1309987 thread. (After activating FA, do not read SVT, read ECU and save it as actual SVT. Then press edit and delete every ECU except HC2. Than calculate target SVT and TAL) I was flashing only with swDeploy and cdDeploy option selected. All looks good now in SVT (see picture attached). Unfortunately ISTA throws some error messages (picture attached). Do you think this is because these units are faulty or shall I try to flash it again with blFlash option selected? Thanks |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
G01 2019 X3 - ATM Replacement/Coding Help Needed | jchisholm17 | 10 | 319 |
18-04-2024, 21:44 PM Last Post: jchisholm17 |
|
TMS FRM3 F10 Coding issue | mj_mj_mj | 17 | 1,897 |
16-04-2024, 09:30 AM Last Post: user_530d |
|
ID4 evo to ID6 Evo full retrofit, ATM issues 03178A | mitch32 | 1 | 147 |
15-04-2024, 17:52 PM Last Post: mitch32 |
|
BMW F10 RHD to LHD coding? | morto | 12 | 1,468 |
13-04-2024, 17:32 PM Last Post: pablito94 |
|
E60 EVO OABR to OBD Coding | painsage | 13 | 477 |
12-04-2024, 10:54 AM Last Post: painsage |
|
1 serie F40 coding help | nixte | 1 | 145 |
08-04-2024, 17:16 PM Last Post: Fatalix |
|
BMW E60 Telephone coding for mr12volt | Jbpetkov | 3 | 191 |
06-04-2024, 19:02 PM Last Post: Jbpetkov |
|
NBT Evo CAFD missing after coding error | Mugga | 12 | 498 |
05-04-2024, 20:30 PM Last Post: Mugga |
|
EVO USB and BT Issues | walkernight88 | 9 | 420 |
02-04-2024, 16:39 PM Last Post: hashtagmaster |
|
BMW E60 coding problem | GarageX | 8 | 348 |
02-04-2024, 10:07 AM Last Post: GarageX |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content