Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW E89 EDC Problem
12-09-2019, 13:20 PM,
Post: #1
|
|||
|
|||
BMW E89 EDC Problem
After changing of right front damper I have this DTC: 005FE1 EDC: Steering angle, correction value exceeded
With Tool32 tried to reset values of EDC but not successful, I didn't try to initialise Steering Angle because I don't want to make some other problems. Is it possible sensor of steering rack to be defective? NBT EVO Apple CarPlay Full Screen, Navigation, Video in Motion, SSH, CP
EntryNav EVO Apple CarPlay, Navigation, CP, SSH, full FSC Pack BMW FSC Retrofit CIC/NBT/EVO 8HP ISN Reset F Series Remote Remote VAG Navigation Update, Apple CarPlay and Android Auto Programming and Coding |
|||
12-09-2019, 13:41 PM,
Post: #2
|
|||
|
|||
RE: BMW E89 EDC Problem
1. Is the car in accident?
2. Is right side steering rack tie rod okay? 3. Wiring checked? |
|||
12-09-2019, 15:27 PM,
Post: #3
|
|||
|
|||
RE: BMW E89 EDC Problem
1. No accident
2. I didn't check 3. Wiring okay because comfort and sport mode are working. NBT EVO Apple CarPlay Full Screen, Navigation, Video in Motion, SSH, CP
EntryNav EVO Apple CarPlay, Navigation, CP, SSH, full FSC Pack BMW FSC Retrofit CIC/NBT/EVO 8HP ISN Reset F Series Remote Remote VAG Navigation Update, Apple CarPlay and Android Auto Programming and Coding |
|||
13-09-2019, 07:07 AM,
Post: #4
|
|||
|
|||
RE: BMW E89 EDC Problem
What components did you open when changing the dumper? Start with alignment/initialisation. Don't fear, nothing is unresolvable
|
|||
13-09-2019, 18:19 PM,
Post: #5
|
|||
|
|||
RE: BMW E89 EDC Problem
I didn't change the dumper, after changing car is brought to me and I have done initialization and was problem with SZL, after changing of SZL it's only this DTC on the car.
NBT EVO Apple CarPlay Full Screen, Navigation, Video in Motion, SSH, CP
EntryNav EVO Apple CarPlay, Navigation, CP, SSH, full FSC Pack BMW FSC Retrofit CIC/NBT/EVO 8HP ISN Reset F Series Remote Remote VAG Navigation Update, Apple CarPlay and Android Auto Programming and Coding |
|||
13-09-2019, 20:09 PM,
Post: #6
|
|||
|
|||
RE: BMW E89 EDC Problem
(13-09-2019, 18:19 PM)atomantmk Wrote: I didn't change the dumper, after changing car is brought to me and I have done initialization and was problem with SZL, after changing of SZL it's only this DTC on the car. Did you code the DSC ECU after replacement of SZL? This is for getting good serialnumber in SZL |
|||
16-09-2019, 20:15 PM,
Post: #7
|
|||
|
|||
RE: BMW E89 EDC Problem
Yes, DSC is coded and I have try to reset the values on EDC but even says that successful is DTC is still present.
When i do job status_offsetwerte value on STAT_LEWI_OFFSET = 101 must be set as zero after resetting but it's not. This is after resetting with job steuern_stromwerte_vorgeben: piJob("EDCK65","steuern_stromwerte_vorgeben","ORT; 0x5FE1","") Satz : 0 OBJECT = edck65 SAETZE = 1 JOBNAME = steuern_stromwerte_vorgeben VARIANTE = EDCK65 JOBSTATUS = UBATTCURRENT = -1 UBATTHISTORY = -1 IGNITIONCURRENT = -1 IGNITIONHISTORY = -1 Satz : 1 JOB_STATUS = OKAY _TEL_ANTWORT = 7 Bytes 0000 : 83 F1 39 70 21 06 44 ?ñ9p!.D |