[filu02]

Hello members 

Today i have Chrysler Town and Country 2016
The car is rare in Europe so i have a problem.

There is a Airbag module 68233535AC with SPC560P50
I have in this moment fault B2204 ECU Configuration Mismatch but in measure value i see the info the unit is locked after accident.

So anybody can clear this crash or unlock the unit?

I enclose the dflash read with VVDI prog.

[volavka]

give a try this solution !

Pass in PM

[filu02]

Don`t work
the same fault
B2204
and
B222A line mismatch

and in the measure still i see locked and the ecu don`t show the resistance of the airabgs

[filu02]

Don`t work
the same fault
B2204
and
B222A line mismatch

and in the measure still i see locked and the ecu don`t  show the  resistance of the airabgs

I test another file from other source and is totally different solution but still have two fault.

This situation assured me that the problem lies elsewhere.



The problem was a badly encoded gateway !!!

Problem solved.

PS.
I think that in these airbag controllers only the error is deleted by a simple tester.
No need to clear carsh data