Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Vediamo v05.00.05 Sdconnect Config (sdtoolkit inside) help please
26-08-2014, 08:40 AM,
(This post was last modified: 18-04-2017, 21:18 PM by Clusters.)
Post: #1
|
|||
|
|||
Vediamo v05.00.05 Sdconnect Config (sdtoolkit inside) help please
Hello Guys i try to get Vediamo 5.00.05(modified from this forum) running on a xentry Tab Win 7 32Bit vediamo runs ok but
my problem is that i cant get connection with my sdconnect c4 mux(yesterday i change ip and do a mux update with toolkit from other diagnosis and sdconnect toolkit and vediamo worked with every sdconnect mux!!!!!just plug and play no tuning around the Ips even with different mux!!! but AFTER a reboot the problem comes back!! maybe a win 7 error??(32bit) or other driver lan???)by the way i install vediamo 04.02.02 under server caesar dates there is Part w(sdconnect!!!) so it work!!! Vediamo 5 dont have part W in Options(But still recognize the sdconnect mux sometimes) thats all my Experiences with this system i try the Lan connection and allready set the ip to : 172.29.127.119/113 and subnetmask to 255.255.0.0 but it dont work. i install The InstallSDconnectToolkit2130 .and the toolkit recognize the mux but everytime i select the mux the administratortool says Connection Error 749 and sometimes 701 Error(No VCI Found) is there any solution to make sdconnect works under windows 7 with lan? i would be very thankful for any ideas regards |
|||
27-08-2014, 09:19 AM,
Post: #2
|
|||
|
|||
RE: Vediamo v05.00.05 Sdconnect Config
I upload the sd toolkit for you Version 2.1.3 have someone version 2.1.7.0????
pw: notsoeasy please give rep thx and like thanks |