[atomantmk]

I want to code it out AFS on Q7 but don't work this what I have found on internet.

1. Turn off your car.  (make sure everything is off, you may pull the wrong fuse and cause more errors. BE WARNED)
   
   
2. Open the driver side fuse panel between the door and the dashboard.
   
   
3. Remove Fuse18 Headlight Electronics Left (5A)
   
   
4. Open the passenger side fuse panel
   
   
5. Remove Fuse 9 Headlight Electronics Right (5A)
   
   
6. Turn on the ignition and leave your engine off, now using your VCDS
   
   
7. Go into the Central Electronics 09 and code it for Xenon Only Should be currently a 3, change it to a 2, should be like this (0xx2xxx)
   
   
8. Go into Instruments 17 and remove the AFS by subtracting 64 from the first 4 digits I changed (2129XXX) to (2065XXXX)
   
   
9. Go into CAN Gateway 19 and remove 55 Headlight range.  This can be done in coding or installation list
   
   
10. Now turn off your vehicle and pull Fuse 15 Instrument Cluster (10A), wait a couple seconds and reinsert it.
    
    
11. Turn on your car, the error should now be gone and the ECU will no longer think AFS system is installed.
    Now it's this error:55 Headlight Regulation    System description: Dynamische LWR  H01    Software number: 8P0907357F    Software version: 0010    Coding: 0000007    Trouble codes:         01539 - Headlights were not adjusted no or incorrect basic setting/adaptation            Active                Priority:  2                Frequency counter:  1                Driving cycle: 209                Mileage: 288408 km                Date: 2019-09-19 13:32:20

How to turn off?