Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

F10 2010 Pre-LCI Combox Retrofit
20-09-2019, 07:47 AM,
Post: #1
F10 2010 Pre-LCI Combox Retrofit
Hoping you guys could help me, I wanna replace my TCU with Combox, does anybody know what wires I have to repin?
Quote this message in a reply
20-09-2019, 08:49 AM,
Post: #2
RE: F10 2010 Pre-LCI Combox Retrofit
(20-09-2019, 07:47 AM)Boeufy Wrote:  Hoping you guys could help me, I wanna replace my TCU with Combox, does anybody know what wires I have to repin?

Start here mate. All your wiring needs are available here.


Attached Files
TCU.txt
File Type: .txt
Downloaded: 52 times
Size: 344 bytes


I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC
clapping BMW ISPI Admin Client License (Contact for info)
cheers Complete EntryNav2 FSC solution for Retrofit/Component Protection
enjoyKAFAS2 7E/BE/BF KAFAS4 11F/13E/13F
biggrin Carplay activations/FullScreen/ID4-5
rock EntryNav2 Carplay activations OEM/Provisioning
mail Contact me for more information
Quote this message in a reply
[+] 1 user says Thank You to DayvG for this post
20-09-2019, 09:04 AM,
Post: #3
RE: F10 2010 Pre-LCI Combox Retrofit
(20-09-2019, 08:49 AM)DayvG Wrote:  
(20-09-2019, 07:47 AM)Boeufy Wrote:  Hoping you guys could help me, I wanna replace my TCU with Combox, does anybody know what wires I have to repin?

Start here mate. All your wiring needs are available here.
Thank You that's brillant

I just been reading up a few posts about Combox retrofits and noticed I only need to repin if my car comes with TCU & MULF2 but I'm pretty sure I only have TCU and no MULF2, Can I just replace the TCU with a direct swap from TCU to Combox and then do all the coding? Many thanks again
Quote this message in a reply
20-09-2019, 09:12 AM,
Post: #4
RE: F10 2010 Pre-LCI Combox Retrofit
Best way forward is compare the connector and plug you have with the SSP and make a not of what is wired where and confirm the pins. Then compare that with the pinout for what you are retofitting and go from there. I did something similar for my PDC and also TCB-ATM retrofit. Quite simple once you check the wires against the SSP.

I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC
clapping BMW ISPI Admin Client License (Contact for info)
cheers Complete EntryNav2 FSC solution for Retrofit/Component Protection
enjoyKAFAS2 7E/BE/BF KAFAS4 11F/13E/13F
biggrin Carplay activations/FullScreen/ID4-5
rock EntryNav2 Carplay activations OEM/Provisioning
mail Contact me for more information
Quote this message in a reply
[+] 1 user says Thank You to DayvG for this post
20-09-2019, 09:21 AM,
Post: #5
RE: F10 2010 Pre-LCI Combox Retrofit
Combox Installation Instruction for Exx Series BMW.pdf
File Type: .pdf
Downloaded: 46 times
Size: 1.25 MB

Same for f10
Reputation: +1 - Boeufy [+1]
Quote this message in a reply
[+] 1 user says Thank You to Gregor for this post
20-09-2019, 09:48 AM,
Post: #6
RE: F10 2010 Pre-LCI Combox Retrofit
(20-09-2019, 09:21 AM)Gregor Wrote:  Same for f10

That DIY is perfect, thank you

but I have 1 small problem, I don't know if my car has TCU & MULF or just TCU, I looked up the options and the only option my car has is $644 but both options in the DIY have $644??? I'm a bit confused

VIN: C493159
Quote this message in a reply
20-09-2019, 09:49 AM,
Post: #7
RE: F10 2010 Pre-LCI Combox Retrofit
That’s why I said look at your connectors/plug and the ECU to determine what you have installed. The wiring will correspond to the SSP.

I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC
clapping BMW ISPI Admin Client License (Contact for info)
cheers Complete EntryNav2 FSC solution for Retrofit/Component Protection
enjoyKAFAS2 7E/BE/BF KAFAS4 11F/13E/13F
biggrin Carplay activations/FullScreen/ID4-5
rock EntryNav2 Carplay activations OEM/Provisioning
mail Contact me for more information
Quote this message in a reply
20-09-2019, 09:53 AM,
Post: #8
RE: F10 2010 Pre-LCI Combox Retrofit
I've located the TCU but I can only see 1 module, I've heard the MULF can be in a different place like the rear seats etc

I'm not very good with wiring so I'm ordering adapter from Kufatec but it asks me if it's TCU+MULF or just TCU
Quote this message in a reply
20-09-2019, 11:14 AM,
Post: #9
RE: F10 2010 Pre-LCI Combox Retrofit
(20-09-2019, 09:53 AM)Boeufy Wrote:  I've located the TCU but I can only see 1 module, I've heard the MULF can be in a different place like the rear seats etc

I'm not very good with wiring so I'm ordering adapter from Kufatec but it asks me if it's TCU+MULF or just TCU

Connect to car with ISTA or E-SYS  and see what you have.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Kafas issue aftrer ACC Retrofit It3_Magic 14 525 Yesterday, 07:44 AM
Last Post: It3_Magic
  G82 rear tail lights CSL retrofit Sauron 10 765 20-04-2024, 07:35 AM
Last Post: SANYA
XZBMW BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS intel123 891 465,665 20-04-2024, 01:05 AM
Last Post: fe7565
XZBMW Neck warmer retrofit Just2fast5 5 377 17-04-2024, 11:20 AM
Last Post: Spirit5676
  ID4 evo to ID6 Evo full retrofit, ATM issues 03178A mitch32 1 173 15-04-2024, 17:52 PM
Last Post: mitch32
  Bmw G31 retrofit Mgu id7 atm problem intranet 19 2,307 15-04-2024, 09:21 AM
Last Post: evaldazj
XZBMW BMW E84 Cruise control retrofit not workig Alyn546 4 219 12-04-2024, 14:23 PM
Last Post: DieStream
  F10 FLA retrofit beng2k 30 1,023 11-04-2024, 18:43 PM
Last Post: beng2k
  Making F-series combox work in e-series Ryn079 5 618 11-04-2024, 15:03 PM
Last Post: wrp_199
XZBMW BMW f20 KOMBI2 retrofit bm92 15 504 10-04-2024, 07:51 AM
Last Post: bm92

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content