Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
EIS R230 2003
23-09-2019, 21:10 PM,
Post: #1
|
|||
|
|||
EIS R230 2003
need a bit of guidance , had issues with the eis unit, (key jamming occasionally )
I removed the unit and read both r1 and r2 chips in eis with R270,, (4j74y mask) saved files epprom and flash bin , then purchased a used unit, put both original files in the r1 and r2 chips on the used eis , connected back to car and the key turns and car starts and drives, but when read with xentry or auto logic , there are control units not able to connect too eis roof are 2 and showing errors in DAS and a gateway error, , the eis also shows no vin or mb part number in DAS, unable to read or single out eis in das, it just will not connect to them, any ideas ? thanks |
|||
24-09-2019, 02:48 AM,
Post: #2
|
|||
|
|||
RE: EIS R230 2003
hc908 dont have vin inside
|
|||
24-09-2019, 20:04 PM,
(This post was last modified: 24-09-2019, 20:08 PM by Martin1234.)
Post: #3
|
|||
|
|||
RE: EIS R230 2003
(24-09-2019, 02:48 AM)mercis Wrote: hc908 dont have vin insideYES SORRY thats the flash on R1 has, here is the R2 eeprom file, this is the file i red from the original eis and put wrote into the used unit, |