Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

BMW BDC Bench Flashing
17-03-2022, 16:48 PM,
Post: #21
RE: BMW BDC Bench Flashing
So, as I wrote: need ELV.
Quote this message in a reply
10-04-2022, 20:52 PM,
Post: #22
RE: BMW BDC Bench Flashing
Hi,

does anybody know what happens when I erase (write 0x00 or 0xFF) to both M95256 of an BDC?
I ask because I have a used BDC for bench setup but have no matching keys.
I can set KL15 on via Tool32 which results in startup of my connected cluster, but it looks like I can't change coding.

Would it be possible to learn a "virgin" key to it?
Or will I brick it if the EEPROMS had been cleared once. Or can I write back a backup an get back the actual state?

Sorry for may asking stupid questions.

Best regards
Quote this message in a reply
19-11-2022, 00:57 AM,
Post: #23
RE: BMW BDC Bench Flashing
Hello all,

Facing difficulties to flash fem at bench... it has working key and emergency key coil....
Tried tool32 with klemmen but conditions not correct.
Any advise will be good
Thanks in advance
Quote this message in a reply
19-11-2022, 08:28 AM,
Post: #24
RE: BMW BDC Bench Flashing
You can use INPA to turn on "assembly mode" (STATUS / KLEMEN and last mode). Then you will be able to turn on the ignition (KL15). Of course you must have a key, start / stop button - or FEM platform. I do this way and I can flash and code in Esys. Personally, I use the FEM module and clocks on the bench with the platform
Reputation: +1 - jaramillo [+1]
Quote this message in a reply
19-11-2022, 18:43 PM, (This post was last modified: 19-11-2022, 18:46 PM by jaramillo.)
Post: #25
RE: BMW BDC Bench Flashing
(19-11-2022, 08:28 AM)Cowboy Wrote:  You can use INPA to turn on "assembly mode" (STATUS / KLEMEN and last mode). Then you will be able to turn on the ignition (KL15). Of course you must have a key, start / stop button - or FEM platform. I do this way and I can flash and code in Esys. Personally, I use the FEM module and clocks on the bench with the platform
Thanks for your answer.
Can you please show me a picture of the cables pinout of con 7 and 8.. i think my fem bench test plataform is messed...

Thanks in advance

(19-11-2022, 18:43 PM)jaramillo Wrote:  
(19-11-2022, 08:28 AM)Cowboy Wrote:  You can use INPA to turn on "assembly mode" (STATUS / KLEMEN and last mode). Then you will be able to turn on the ignition (KL15). Of course you must have a key, start / stop button - or FEM platform. I do this way and I can flash and code in Esys. Personally, I use the FEM module and clocks on the bench with the platform
Thanks for your answer.
Can you please show me a picture of the cables pinout of con 7 and 8.. i think my fem bench test plataform is messed generic one  that has ignition switch...

Thanks in advance
Quote this message in a reply
19-11-2022, 21:06 PM,
Post: #26
RE: BMW BDC Bench Flashing
Please, if it's not enough, I can do a detailed description, but not until tomorrow.


Attached Files Thumbnail(s)
   
FEM platform.rar
File Type: .rar
Downloaded: 40 times
Size: 13.6 MB

Reputation: +1 - jaramillo [+1]
Quote this message in a reply
[+] 1 user says Thank You to Cowboy for this post
20-11-2022, 00:57 AM,
Post: #27
RE: BMW BDC Bench Flashing
Thanks for your help, really apreciate it...
Seems my connectors are equal to yours in terms of possitions.. the main issue is that i dont have eternet connection and ignition is not openned...

Update
Had to trace continuity to connector 8 and obd2, all was a mess...I have connection now, but not turning ignition....key is working,,,

Update 2
Fem flashed... thanks again Cowboy...INPA did the trick.. thanks for that hint
Quote this message in a reply
20-11-2022, 18:45 PM,
Post: #28
RE: BMW BDC Bench Flashing
I made a small video of how to turn on the KL15 using INPA. My FEM is with ELV. Sometimes you have to press the F8 button in INPA several times for it to work. Once this mode is on you will always get KL 15 even if you use ICOM or ENET together with E-sys


Attached Files
KL15 FEM.txt
File Type: .txt
Downloaded: 72 times
Size: 73 bytes

Reputation: +2 - jaramillo [+1] , AZCKNCLLC [+1]
Quote this message in a reply
[+] 3 users say Thank You to Cowboy for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Tool for bench read 8hp Garryq 9 1,571 26-03-2024, 09:32 AM
Last Post: skywoker
  Bosch MEVD172H bench backup mrproper 1 249 23-03-2024, 18:43 PM
Last Post: Ratnik1990
  Flashing a stock box map to an E60 with XHP? GoNz0- 10 304 20-03-2024, 09:33 AM
Last Post: tomaxsas
XZBMW flashing modules hw-id redog4dy 5 305 04-03-2024, 13:26 PM
Last Post: redog4dy
  Power supply for coding flashing kklobo 14 824 29-02-2024, 08:37 AM
Last Post: nBlacky
XZBMW ENAV2 bench activation Airbus 10 800 25-02-2024, 08:17 AM
Last Post: jb2005
  Motronic 3.3.1 bench jaramillo 3 174 13-02-2024, 05:12 AM
Last Post: 2013m5
XZBMW problem with flashing CHAMP2 module (the programming dependencies are not correct) azwgh 17 667 11-02-2024, 19:39 PM
Last Post: azwgh
  Dde Coding/flash with esys in bench? ruben_17non 0 183 08-02-2024, 21:28 PM
Last Post: ruben_17non
  CAS 3 need repair after flashing stydly 10 459 02-02-2024, 15:43 PM
Last Post: 16eddi67

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content