Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW TP8/TP12 Password read with MPPS V18 Tricore Boot?
13-12-2017, 01:31 AM,
(This post was last modified: 13-12-2017, 02:41 AM by Enabled.)
Post: #1
|
|||
|
|||
BMW TP8/TP12 Password read with MPPS V18 Tricore Boot?
I am trying to read a BMW F30 EDC17C50 Tricore DDE. This is a TP8/TP12 ecu, which usually needs the GPT function in KTAG to read password.
So, first I must read the tricore passwords, and it seems MPPS V18 can do it according to google searches... BUT something must be done with pin 89 (GPT2) and pin 92 (GPT1)? Some sort of resistors and connection. (I have also seen these pins be called R1 and R2. Or R3 and R4 in OBDTuning.de .) I have searched and haven't found exactly how to try to adapt MPPS V18 to do it. Can anyone help? How do I connect it? PS. I know that KTAG can do it. Trying to see if possible with MPPSv18 clone. . **Unless, I just need to remove the boot pin and do the MPPS BMW TP8/TP12 procedure without boot resistor? |
|||
13-12-2017, 20:11 PM,
(This post was last modified: 13-12-2017, 20:12 PM by Enabled.)
Post: #2
|
|||
|
|||
RE: BMW TP8/TP12 Password read with MPPS V18 Tricore Boot?
|