Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Please help! EWS not working! Damage!
30-09-2019, 03:24 AM,
Post: #1
|
|||
|
|||
Please help! EWS not working! Damage!
Hello all!
I guess this is the best place I can get help with my issue! So I have this 2008 BMW X3 3.0si , No crank No start then another day when I try to crank the engine The relay on EWS keep clicking rapidly, hooked up a scanner Foxwell NT520pro was not able to identify vehicle automatically. I went ahead got a piece used EWS 3 off eBaydand I know this is not a plug and play! And I do realize that the original EWS is 4.4 but I not able to get a used 4.4. So my question is, can I do it this way? Replacing EWS4.4 with EWS3 by viginize it and then re sync them? Thank you for your time, any suggests will be highly appreciate! |
|||
30-09-2019, 05:26 AM,
Post: #2
|
|||
|
|||
RE: Please help! EWS not working! Damage!
I don't think that ews3 can replace ews4.4
My opinion Regards Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
30-09-2019, 06:36 AM,
Post: #3
|
|||
|
|||
RE: Please help! EWS not working! Damage!
(30-09-2019, 03:24 AM)terryjianlin Wrote: Hello all! (30-09-2019, 05:26 AM)raffy haddad Wrote: I don't think that ews3 can replace ews4.4 Thank you for your opinion! Well I am able to get a used Ews4.4, here is the real question How do I wipe out the data inside or how do I change the data in it??by using a AK90 ? Thank you again |
|||
30-09-2019, 07:26 AM,
(This post was last modified: 30-09-2019, 07:28 AM by raffy haddad.)
Post: #4
|
|||
|
|||
RE: Please help! EWS not working! Damage!
Is this ews has 2l86d mcu ?
If yes can you read orig data ? If yes Read both data and save them . then just write orig to donor ews It should work . Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
Reputation: +2 - Abou-raffik [+1] , dabaca [+1] | |||
30-09-2019, 09:06 AM,
Post: #5
|
|||
|
|||
RE: Please help! EWS not working! Damage!
Not sure if the damaged EWS is accessible , I dont have the AK90 in hand right . Is there a method to just clear all the datas stored in the EWS? Thank you!
|
|||
30-09-2019, 12:38 PM,
Post: #6
|
|||
|
|||
RE: Please help! EWS not working! Damage!
You can desolder the microcontroller from ews4.4 and solder to replacement ews4.4.
You cannot downgrade, nor virginize. Also, a new ews at dealer is just over $100.... |
|||
Reputation: +2 - ROD-BENDERS [+1] , Abou-raffik [+1] | |||
01-10-2019, 00:12 AM,
Post: #7
|
|||
|
|||
RE: Please help! EWS not working! Damage!
(30-09-2019, 12:38 PM)Enabled Wrote: You can desolder the microcontroller from ews4.4 and solder to replacement ews4.4. Thank you for your input Indeed I did find one cost about $135USD! For this brand-new EWS, Do I just plug in and resync with DME? |
|||
01-10-2019, 00:23 AM,
Post: #8
|
|||
|
|||
RE: Please help! EWS not working! Damage!
Just plug in and drive. You may have to code default settings if that wasn't done.. but that's simple.
There is no sync with your dme, as it is the MSV80. No rolling codes. |
|||
Reputation: +2 - ROD-BENDERS [+1] , Abou-raffik [+1] | |||
01-10-2019, 03:34 AM,
Post: #9
|
|||
|
|||
RE: Please help! EWS not working! Damage!
For real! Thank you all for helping! Really appreciate!
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content