Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
AMB2300 PCB Rework
30-09-2019, 23:38 PM,
Post: #1
|
|||
|
|||
AMB2300 PCB Rework
In addition to the subject that deals with the processing of the VAS5054A, I also add a way of processing the plate for the AMB2300, for those who do not own the Safting board.
Starting from the data sheet of the AMB2300 module I determined pins from the Softing board connector. Next we have adapted the board to the needs of the BT module. I soldered a resistance of zero Ohm, to make the continuity, two of 22 Ohm, one of 1000 Ohm in addition to which I added one of 0 Ohm to ensure the required length; a tantalum capacitor with a value of 10 microF, and a 100 nanoF ceramic. Because the position of the connectors on the front of the plate does not correspond to the original one, I made the connections with the help of some pieces of wire. Finally, the test with ODIS-S v5.1.6 Componnent: 1608 0 Ohm - 1 1608 22 Ohm - 2 3225 1000 Ohm - 1 2520 0 Ohm - 1 3216 10 microF Tantalum caps - 1 1608 100 nanoF ceramic caps - 1 |
|||
Reputation: +1 - PhilipArt [+1] | |||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
AMB2300 firmware for VAS5054A | toza27 | 3 | 679 |
14-09-2019, 18:59 PM Last Post: justdiag |
|
amb2300 chips | apoelistas | 0 | 354 |
09-11-2018, 19:24 PM Last Post: apoelistas |
|
Is this fake AMB2300? | rocdeng | 8 | 1,547 |
13-09-2018, 16:56 PM Last Post: Enabled |
|
Vas5054a Confirmed Fake amb2300 BT picture without shield | champagnecharly | 4 | 1,677 |
28-07-2017, 10:24 AM Last Post: champagnecharly |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content