Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Tool32 problem
03-10-2019, 16:31 PM,
Post: #1
Tool32 problem
Hi there,
 Im starting to be crazy about tool32. Everytime I try to run a job I get runtime 5 error - Tool Set Error: Run-time error ’5’ – Invalid Procedure Call

Connection is ok, I found out a solution in FAQ like 

Reason: The Tool Set was started twice in a very short period of time.
Solution: Close all Tool Set processes that are running and start the Tool Set again with only one double-click.

But there is not any another instance of toolset in the processes! Im getting mad of it. This happens even after restart.

Do somebody have any experience with that?

Thanks!!
Quote this message in a reply
03-10-2019, 19:33 PM,
Post: #2
RE: Tool32 problem
Are you using ICOM or standard interface?
Is your tool32 set to run as Admin and with Win XP SP3 compability?
Is the interfaces delay set for 1ms?
Quote this message in a reply
03-10-2019, 20:04 PM,
Post: #3
RE: Tool32 problem
Tool32 should be ran as administrator. It doesn't have to be XP compatibility, however.
Quote this message in a reply
04-10-2019, 13:45 PM,
Post: #4
RE: Tool32 problem
Always start as admin

works fine on Windows 10 x64 ..

idea Click @ Thanks & Rep. idea 
* BUY  -> MEGA.nz Account 
CREATE AN ACCOUNT YOURSELF - GET THE DATA INTO YOUR ACCOUNT - OFFER IT TO SOMEONE ELSE FROM THERE
Quote this message in a reply
07-10-2019, 11:44 AM,
Post: #5
RE: Tool32 problem
It does this also with admin rights. And Im using oem ICOM.
Quote this message in a reply
16-10-2019, 06:57 AM,
Post: #6
RE: Tool32 problem
Any other advice?
Quote this message in a reply
10-09-2022, 10:04 AM,
Post: #7
RE: Tool32 problem
I do have the same issue. Dont know why. Using icom and win8.1 32bit

Član/Member
BMW Auto Klub “M” Zagreb
BMW Club Europa
Quote this message in a reply
10-09-2022, 13:18 PM,
Post: #8
RE: Tool32 problem
Is there another Ediabas package or folder on your system? --> Delete thr second One, you don't need, its make Problems....

Coding E + F + G Modelles in near from Passau in Germany (Bavaria)!
Navigationmaps Updates for E + F + G Modells!
I-Data Update on E + F - Modells.
Repair FRM3 & LM !!


Quote this message in a reply
[+] 1 user says Thank You to Illuminati23 for this post
10-09-2022, 13:53 PM,
Post: #9
RE: Tool32 problem
If your Ediabas folder find the REGSVR32.BAT then start it (with administrator) wink

Vojnó
Press Thanks and reputation under if this post helped you. 
Reputation: +4 - zmaj [+1] , al70 [+1] , Twointje [+1] , BMWzone [+1]
Quote this message in a reply
[+] 4 users say Thank You to Vojno for this post
12-09-2022, 20:28 PM, (This post was last modified: 12-09-2022, 20:30 PM by zmaj.)
Post: #10
RE: Tool32 problem
(10-09-2022, 13:53 PM)Vojno Wrote:  If your Ediabas folder find the REGSVR32.BAT then start it (with administrator)  wink

Hi, thank You for the tip. I ran it and it told me that tool32 is installed and the two modules are registred. Will try tomorow to connect it to my car. I hope it will do it

(10-09-2022, 13:18 PM)Illuminati23 Wrote:  Is there another Ediabas package or folder on your system? --> Delete thr second One, you don't need, its make Problems....

No there isnt. every time i make a backup I put it in a rar so it should not intefere. Everything works except tool32 (and i need it).

Član/Member
BMW Auto Klub “M” Zagreb
BMW Club Europa
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Tool32 Brakefluid Argument bmchicago 1 74 7 hours ago
Last Post: Marx
XZBMW Bmw 5,f10 radio problem RobertRexhaj 3 77 Yesterday, 18:47 PM
Last Post: Unspec
  ISTA launcher problem Red_bean_bun 1 167 26-03-2024, 05:11 AM
Last Post: 2013m5
  Dme Cas synchronization Problem donjuan020 3 203 25-03-2024, 21:55 PM
Last Post: BmwMerc
  BMW e39 530d 2001 problem after MAF change boweld11 3 104 24-03-2024, 22:44 PM
Last Post: SkeYT
XZBMW Entrynav2 Maps Problem Chillmeister 3 286 24-03-2024, 17:18 PM
Last Post: Chillmeister
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,905 24-03-2024, 11:29 AM
Last Post: Twointje
  Battery lead positive underfloor problem da.2022 10 205 24-03-2024, 09:38 AM
Last Post: pupu144
  Problem Retrofit electrified steering column on the G31 LCI smercki 12 337 22-03-2024, 12:55 PM
Last Post: Node
XZBMW X5 G05 with MGU and ATM: GPS problem david357 8 786 19-03-2024, 21:25 PM
Last Post: Mwahab

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content