Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

OPINIONS ABOUT THIS ICOM PCB
04-10-2019, 14:48 PM,
Post: #1
XZBMW  OPINIONS ABOUT THIS ICOM PCB
I have never seen this version before.  it was bought as an A2 in next casing..... thankful for anybody about this icom....ok or crap.. yes

https://ibb.co/ypnWTyV

https://ibb.co/JBSnffk

https://ibb.co/4s4J8DS

https://ibb.co/x28ScKT

https://ibb.co/XtPzrJh
Quote this message in a reply
04-10-2019, 18:05 PM, (This post was last modified: 04-10-2019, 18:10 PM by user0086.)
Post: #2
RE: OPINIONS ABOUT THIS ICOM PCB
Looks a little bit like a VXDIAG VCX SE, that can emulate the ICOM.But I'm not sure since I don't have a VXDIAG. What does the webinterface look like?


Attached Files Thumbnail(s)
       
Quote this message in a reply
05-10-2019, 08:54 AM,
Post: #3
RE: OPINIONS ABOUT THIS ICOM PCB
Chinese already selling ICOM analogue in ICOM Next case? I'm building same in ELM327 case smile Small module looks like MT76x8 based and probably running OpenWRT, STM32 is for CAN and K,L-lines on OBD interface. Everything will work, but will they offer firmware update with next bmw update...


Attached Files Thumbnail(s)
   
Quote this message in a reply
05-10-2019, 20:06 PM,
Post: #4
RE: OPINIONS ABOUT THIS ICOM PCB
I have the genuine a2 as well as genuine next. It looks like you have a few missing components on the board which as you know is normal for Chinese stuff. Have you tried how it works?
I know some clone a2s couldn't see kl15 on newer vehicles with no pin 7 in obd connector.

Not to sure how confident i'd be on programming with it though.
Visit this user's website
Quote this message in a reply
06-10-2019, 01:28 AM,
Post: #5
XZBMW  RE: OPINIONS ABOUT THIS ICOM PCB
it came in a next case. confirmed now its a vxdiag pcb with bmw license. it poppes up as an icom in bmw vci manager but cant connect due to wrong firmware. wich cant be updated with bmw firmware. have updated to vxdiags latest but still no go. it also poppes up in xentry toolkit so im guessing it will work with odis also etc..
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,716 Yesterday, 05:59 AM
Last Post: hashtagmaster
XZBMW Poor wifi signal from new ICOM's bmchicago 1 127 26-03-2024, 03:04 AM
Last Post: rocdeng
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,885 24-03-2024, 11:29 AM
Last Post: Twointje
  TESTO tool with ICOM Rolzs 5 312 17-03-2024, 20:23 PM
Last Post: Vojno
  Request xHP 6HP decrypted files and icom flasher tste1982 10 822 05-03-2024, 22:47 PM
Last Post: bradsm87
XZBMW ICOM Firmware (NEXT & A2) always current! Vojno 203 41,890 16-02-2024, 19:32 PM
Last Post: Vojno
XZBMW BMW_ISPI_ICOM-FW_03-23-22 & ICOM-Next-FW_04-23-22 shawnsheridan 22 2,363 05-02-2024, 23:47 PM
Last Post: vagrom
  Connect to MGU via SSH and ICOM anton.maier 1 322 02-02-2024, 04:46 AM
Last Post: VroomVroom
XZBMW how to connect icom remotely? dfb 5 515 29-01-2024, 22:24 PM
Last Post: dfb
XZBMW BMW ICOM OBD main cable 15pin to 16pin body1982 5 552 27-01-2024, 04:42 AM
Last Post: body1982

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content