[Ibrahim24]

Hi all, 

I've noticed something different from Esys 3.33. 
Some tabs are now pre checked while the most ones are gone. 

Is the flashing process still the same as in Esys 3.27.1 in Esys 3.33?

For example: I'v recently flashed my EGS with Psdzdata 4.18.30 and now when I wanted to try on with 4.19.30 my check boxes are only: swDeploy and cdDeploy. I can't click on blFlash.

Is this the normal behavior ?

[m3nt4l]

Hi all, 

I've noticed something different from Esys 3.33. 
Some tabs are now pre checked while the most ones are gone. 

Is the flashing process still the same as in Esys 3.27.1 in Esys 3.33?

For example: I'v recently flashed my EGS with Psdzdata 4.18.30 and now when I wanted to try on with 4.19.30 my check boxes are only: swDeploy and cdDeploy. I can't click on blFlash.

Is this the normal behavior ?

I believe this is normal. The boxes which are greyed out means that those modules are already at the most recent updated status and don’t need updating. In your example only the swDeploy and cdDeploy need updating within the EGS

[Ibrahim24]

So I can assume everything what's in the flash guide, is still the same in 3.33!

[Batje]

Hi all, 

I've noticed something different from Esys 3.33. 
Some tabs are now pre checked while the most ones are gone. 

Is the flashing process still the same as in Esys 3.27.1 in Esys 3.33?

For example: I'v recently flashed my EGS with Psdzdata 4.18.30 and now when I wanted to try on with 4.19.30 my check boxes are only: swDeploy and cdDeploy. I can't click on blFlash.

Is this the normal behavior ?

In the TAL calculation window you should see the bootloader of the EGS in black, that means it is the most recent according to your psdzdata and will not be updated. that's why you cannot select blflash in the tal execution for the EGS.

[radzisz97]

Hi, i have the same problem, i want to flash FRR, i know there is some way to do it, maybe someone can help me ?

[Mr_R]

Hi, i have the same problem, i want to flash FRR, i know there is some way to do it, maybe someone can help me ?

Hello.
Where do you see the problem?
For the FRR controller, there is a new swDeploy (software flash files), as well as a new cdDeploy (configuration files). The boot loader is up to date.
So you can flash the swDeploy and the cdDeploy at the FRR on newer versions. The bootloader will not be updated.

[radzisz97]

Hi, i have the same problem, i want to flash FRR, i know there is some way to do it, maybe someone can help me ?

Hello.
Where do you see the problem?
For the FRR controller, there is a new swDeploy (software flash files), as well as a new cdDeploy (configuration files). The boot loader is up to date.
So you can flash the swDeploy and the cdDeploy at the FRR on newer versions. The bootloader will not be updated.

I want to flash this module

[dasi]

Hi, i have the same problem, i want to flash FRR, i know there is some way to do it, maybe someone can help me ?

Hello.
Where do you see the problem?
For the FRR controller, there is a new swDeploy (software flash files), as well as a new cdDeploy (configuration files). The boot loader is up to date.
So you can flash the swDeploy and the cdDeploy at the FRR on newer versions. The bootloader will not be updated.

I want to flash this module

You will flash it