Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ F10 failed software update with ISTA
08-10-2019, 12:27 PM, (This post was last modified: 08-10-2019, 12:28 PM by milkyway.)
Post: #21
RE: F10 failed software update with ISTA
Hello!

If you know the files which are needed for a ZGW then it's easy.

For example ZGW1 (with CIC). BTL is 00000929, SWFL 0000092A and 0000092B.
Latest BTL in 4.19.30 for this ECU is btld_00000929_003_004_090 and latest swfl are swfl_0000092A_003_004_170 and swfl_0000092B_003_011_002

Use the same for ZGW2 if you like. Take care, you cannot mix any BTL and SWFL together, they should fit together - so no old BTL and new SWFL or vice versa. And some ecus have swfl dependencies (like EGS). The first and the second swfl should there also fit together.

Now you can write your own TAL and flash the ZGW without calculating any TAL. And once more, there's no need to load any svt in the TAL execution area. Ignore all old manulas for that in which this is inside.

CU Oliver
Reputation: +1 - tyrystor [+1]
[+] 1 user says Thank You to milkyway for this post
08-10-2019, 14:20 PM,
Post: #22
RE: F10 failed software update with ISTA
(08-10-2019, 12:27 PM)milkyway Wrote:  Hello!

If you know the files which are needed for a ZGW then it's easy.

For example ZGW1 (with CIC). BTL is 00000929, SWFL 0000092A and 0000092B.
Latest BTL in 4.19.30 for this ECU is btld_00000929_003_004_090 and latest swfl are swfl_0000092A_003_004_170 and swfl_0000092B_003_011_002

Use the same for ZGW2 if you like. Take care, you cannot mix any BTL and SWFL together, they should fit together - so no old BTL and new SWFL or vice versa. And some ecus have swfl dependencies (like EGS). The first and the second swfl should there also fit together.

Now you can write your own TAL and flash the ZGW without calculating any TAL. And once more, there's no need to load any svt in the TAL execution area. Ignore all old manulas for that in which this is inside.

CU Oliver

Is there any sheet based on we can generate this tal?
List of btl and matching swfl for model version (f10, f30 etc) Or you only based on practice?

If I helped, please magic buttons thx+rep yes yes yes under under under
08-10-2019, 17:16 PM,
Post: #23
RE: F10 failed software update with ISTA
You done it ? Fix it ?
09-10-2019, 01:34 AM, (This post was last modified: 09-10-2019, 01:36 AM by fiz_lth.)
Post: #24
RE: F10 failed software update with ISTA
(08-10-2019, 17:16 PM)tschek Wrote:  You done it ? Fix it ?

Nope, still not fixed. It was a hectic day today no time to even think about this F10


Attached Files
My_FA.zip
File Type: .zip
Downloaded: 16 times
Size: 664 bytes

09-10-2019, 12:00 PM,
Post: #25
RE: F10 failed software update with ISTA
(09-10-2019, 01:34 AM)fiz_lth Wrote:  
(08-10-2019, 17:16 PM)tschek Wrote:  You done it ? Fix it ?

Nope, still not fixed. It was a hectic day today no time to even think about this F10

Your VO is right. Use this to create SVT_soll and than the TAL. 
Look in the Tall about Except Identifier, that this is right and flash only the ZGW. After flashing initial the Flexray Bus.

Or do it like Milkiway say, create your own TAL.
09-10-2019, 16:10 PM,
Post: #26
RE: F10 failed software update with ISTA
If you need latest data for ZGW2 are:

- BTLD: btld_000010F5_003_004_090
- SWFL: swfl_0000092B_005_018_000
- SWFL: swfl_000010F6_003_004_170

This data are for hardware: hwel_000010FD_000_194_000

If I helped, please magic buttons thx+rep yes yes yes under under under
09-10-2019, 20:31 PM,
Post: #27
RE: F10 failed software update with ISTA
I give up.... is anyone willing to assist over team viewer?
09-10-2019, 21:11 PM, (This post was last modified: 09-10-2019, 21:11 PM by Batje.)
Post: #28
RE: F10 failed software update with ISTA
(09-10-2019, 20:31 PM)fiz_lth Wrote:  I give up.... is anyone willing to assist over team viewer?

Send me a pm, i'll help you  wink
Reputation: +1 - fiz_lth [+1]
[+] 1 user says Thank You to Batje for this post
09-10-2019, 23:24 PM,
Post: #29
RE: F10 failed software update with ISTA
Got it sorted, the car is running again! Thanks to Batje who go it fixed for me smile


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW F650gs dme/ecu update Liteace 9 57 43 minutes ago
Last Post: Liteace
  ista 4.46 Standalone kiranabc 33 2,988 4 hours ago
Last Post: Siki78
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,648 627,598 6 hours ago
Last Post: Sedoy
  ista for use whit vcx se db8000 0 36 8 hours ago
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 354 Yesterday, 10:39 AM
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,319 27-03-2024, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,456 27-03-2024, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 125 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 159 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 668 25-03-2024, 08:11 AM
Last Post: Node

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content