[konstantin]

Hi i have one octavia 1.6 clha with edc17c64 ecu with overboost problem.I have cleaned the vanes up to 3 times.Engine will be changed in a month and for this reason i do not want to cleane again the turbo because is a real pain to do this again.Can someone disable the limp mode from this file?
Thanks for your time

[loki954]

i dont think will work. it is not a limp mode but it is no boost mode.
In limp mode the torque is reduced, if turbo is over boosting the actuator is shut down and is no boost mode.
here a file with limiters up i did not touch the turbo pressure. dont be alarmed of the high values it is limiters.
Try but i dont think will work

[rapidtuning]

Log boost and match in map

[loki954]

Log boost and match in map

and how this is going to help? 
just example
if stok is 1.5 and over boost 1.7 the if you go 1.7 in map then will over boost 1.9 and more.......and so on.....
if rise up the limiters wont help, he should fix the problem.

[Jurebv]

he needs to post DTC, it can also go to limp because of the underboost, not just overboost

and this is likely n75 valve faulty...try replacing it and try to change MAP sensor

Best Regards