[Aldi]

Hi guys. 
I'm trying to read a Renault edc16c36 with kess but the ignition goes off before kess finish the reading. I can only ready till to 82-86% of the ecu.
Kess needs about 3 minutes to read the ecu...
Is there any options to make ignition stay longer please? 

Thank you in advance.

[Abou-raffik]

your car with card so hit the start button every minute while reading and writting.this is the good procedure.

good luck

[Aldi]

Hi guys.
There are instructions in the kess user info. Read before continue. You must insert key card and press start button for about 10 seconds until dashboard is fully on.
Before continue please wait for some minutes to be sure if it will remain on and always connect a battery mantainer.

Thanks and happy tuning

[Jurebv]

car MUST be in 1st gear, insert key card and press&hold start button until message "remove keycard" apears, dont remove key card and your ignition is permanently on now

Best Regards