Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW F20 Coding FEM error
27-10-2019, 10:35 AM,
Post: #1
|
|||
|
|||
BMW F20 Coding FEM error
Hello, I'm trying to retrofit LED fog lights on a BMW F20 I added 5A1 to VO and whenever I try to code the FEM I get an error, I can't code, if using Bimmercode works and I can code but with Esys not. About 2 weeks ago I was able to code this same FEM.
Someone can help me? error is this. Caf's suchen Tal wird generiert Abarbeitung wird gestartet Read SVT before TAL execution started. Read SVT before TAL execution finished. TAL execution started. ExecutionID=2019/10/26-18:29:10.513 [] prepareTALExecution started [PROGRESS] [] prepareTALExecution finished [PROGRESS] [] prepareVehicleForCoding started [PROGRESS] [] prepareVehicleForCoding finished [PROGRESS] [FEM_BODY - 40] prepareECUforCoding started [PROGRESS] [FEM_BODY - 40] There was an error during TAL execution, please check the log files. [WARN] [FEM_BODY - 40] - [Exception - UNKNOWN] Errors during NCD generation for CAF cafd_00000794-018_070_003: DataGroup ., Function .: More than one condition parameter is active: [., .] [FEM_BODY - 40] finalizeECUCoding started [PROGRESS] [FEM_BODY - 40] finalizeECUCoding error [PROGRESS] [FEM_BODY - 40] There was an error during TAL execution, please check the log files. [WARN] [FEM_BODY - 40] - [Exception - FEM_BODY - 40] job failed with negative response error: code: exception in job description: MCD3_FinalizeECUCoding threw java.lang.NoSuchFieldError: WRITE_NCD_ERROR; LinkName: FEM_BODY_40_ETHERNET severity: FATAL ERROR [] finalizeVehicleCoding started [PROGRESS] [] finalizeVehicleCoding finished [PROGRESS] [] finalizeTALExecution started [PROGRESS] [] finalizeTALExecution finished [PROGRESS] TAL execution finished [TAL_EXECUTION_FINISHED] TAL-Execution finished with status: "FinishedWithError". [C207] TAL execution finished. Duration: "5s". [C206] Read SVT after TAL execution started. Read SVT after TAL execution finished. Abarbeitung beendet |
|||
27-10-2019, 10:54 AM,
Post: #2
|
|||
|
|||
RE: BMW F20 Coding FEM error
Did you try to just code VO with the orginal VO. Just to make sure coding works. Because your error message seems like you want to code parameters which doesn't work together with VO for example.
If my answer helped you I would appreciate if you could leave a Thanks and a positive Reputation. |
|||
27-10-2019, 10:55 AM,
Post: #3
|
|||
|
|||
RE: BMW F20 Coding FEM error
Don’t try. In this car retrofit 431, 5A1, 609, 508, and 521.
|
|||
28-10-2019, 05:55 AM,
Post: #4
|
|||
|
|||
RE: BMW F20 Coding FEM error
"DataGroup ., Function .: More than one condition parameter is active: [., .]"
This means you have conflicting FA elements. For example, car cannot have both 522 Xenon and 552 LED. Can you post entire SALAPA? |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW F20 ACSM4B internal error | Pedrom92 | 0 | 8 |
36 minutes ago Last Post: Pedrom92 |
|
G01 2019 X3 - ATM Replacement/Coding Help Needed | jchisholm17 | 10 | 289 |
Yesterday, 21:44 PM Last Post: jchisholm17 |
|
Need help for an error. | TibeRiuSca | 1 | 58 |
Yesterday, 05:19 AM Last Post: cipi gutuie |
|
TMS FRM3 F10 Coding issue | mj_mj_mj | 17 | 1,893 |
16-04-2024, 09:30 AM Last Post: user_530d |
|
BMW F10 RHD to LHD coding? | morto | 12 | 1,466 |
13-04-2024, 17:32 PM Last Post: pablito94 |
|
E60 EVO OABR to OBD Coding | painsage | 13 | 469 |
12-04-2024, 10:54 AM Last Post: painsage |
|
VO code RSE_HIGH_NBT2 error | HU_man | 3 | 140 |
12-04-2024, 07:08 AM Last Post: Node |
|
Error by Ista ABL_DIT_AS6100_TRAMODE_RESET | arcelik | 18 | 606 |
08-04-2024, 19:58 PM Last Post: Fatalix |
|
1 serie F40 coding help | nixte | 1 | 145 |
08-04-2024, 17:16 PM Last Post: Fatalix |
|
xdrive off with esys without error in dash | dankocg | 14 | 2,812 |
07-04-2024, 08:57 AM Last Post: Fatalix |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content