Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ EEPROM reading
10-10-2019, 22:04 PM, (This post was last modified: 11-10-2019, 01:57 AM by Rick_Tdi.)
Post: #1
Solved ✔ EEPROM reading
Hi,

I'm trying to figure out how to R/W an EEPROM from a IC.
It is mandatory to desolder the EEPROM for reading, or it can be read directly from PCB with the clip adapter?

Thanks.
Quote this message in a reply
10-10-2019, 22:57 PM,
Post: #2
RE: EEPROM reading
In general its considered best to always remove eeprom from the circuit to minimise the possibility of corrupt data.
Visit this user's website
Quote this message in a reply
11-10-2019, 00:05 AM,
Post: #3
RE: EEPROM reading
If the EEPROM is read from PCB, is there a way to verify that the file is corrupted?
Quote this message in a reply
11-10-2019, 00:16 AM, (This post was last modified: 11-10-2019, 00:17 AM by Clusters.)
Post: #4
RE: EEPROM reading
Not until it is too late. rolling

Some can be corrupted merely by trying to read them, specially with cheap programmers and inexperienced users.

If someone took the time to help you, the least you can do is take a few seconds and press two buttons! 

Thanks [Image: tyl_add.png] + [Image: postbit_reputation.gif] reputation.
Quote this message in a reply
11-10-2019, 00:31 AM,
Post: #5
RE: EEPROM reading
So in other words, with a clone Digiprog 3 is better to desolder before doing anything.
Quote this message in a reply
11-10-2019, 00:36 AM,
Post: #6
RE: EEPROM reading
And save a backup of the original using the eeprom menu before trying to change anything.

Don't join the "I need a good dump" club.

If someone took the time to help you, the least you can do is take a few seconds and press two buttons! 

Thanks [Image: tyl_add.png] + [Image: postbit_reputation.gif] reputation.
Quote this message in a reply
11-10-2019, 01:34 AM, (This post was last modified: 11-10-2019, 01:37 AM by Rick_Tdi.)
Post: #7
RE: EEPROM reading
Haha!
Don't worry, I understand what you mean!

Last question, does it's better to solder a new EEPROM or keeping the old one?
Quote this message in a reply
11-10-2019, 01:47 AM, (This post was last modified: 11-10-2019, 01:48 AM by Clusters.)
Post: #8
RE: EEPROM reading
The old one is fine, I have never changed an eeprom.

Unless you are working with some 35080.

And I see you are fairly new here....

underunderunderunderunderunderunderunderunderunderunderunderunder

If someone took the time to help you, the least you can do is take a few seconds and press two buttons! 

Thanks [Image: tyl_add.png] + [Image: postbit_reputation.gif] reputation.
Reputation: +1 - Rick_Tdi [+1]
Quote this message in a reply
[+] 1 user says Thank You to Clusters for this post
11-10-2019, 01:52 AM,
Post: #9
RE: EEPROM reading
Yes I'm fairly new in dashboard.

I used to do ECU mapping.


Thanks!
Quote this message in a reply
11-10-2019, 15:42 PM,
Post: #10
RE: EEPROM reading
(11-10-2019, 00:36 AM)Clusters Wrote:  Don't join the "I need a good dump" club.

i left from the club few years ago  rolling
always desolder eeprom now smile

Cheeers

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  yamaha versity 2004 year eeprom 24c16 alkazav 0 33 24-03-2024, 17:27 PM
Last Post: alkazav
XZBMW Solved ✔ Solved! BMSX mileage correction Vojno 2 134 14-03-2024, 17:06 PM
Last Post: Vojno
ZVW Caddy 2007 PIN from dash eeprom Elijah 20 389 14-03-2024, 13:19 PM
Last Post: spacewalker
XZBMW BMW 6WA UK eeprom - Vin change and odo brzoza750 2 111 13-03-2024, 14:44 PM
Last Post: DEJMIEN
PCitroen Solved ✔ Change mileage from eeprom 93C66 citroen DS3 2011 Hnk 12 292 08-03-2024, 15:11 PM
Last Post: Hnk
ZVW 5C5920870C bad eeprom Arczi26 1 67 05-03-2024, 08:33 AM
Last Post: Arczi26
  (solved) Volvo L35 pro odo konradzd 0 45 21-02-2024, 14:59 PM
Last Post: konradzd
  RENAULT CAPTUR 2018 LOOKING ORIGINAL FLASH & EEPROM victorysatgr 1 99 17-02-2024, 08:49 AM
Last Post: victorysatgr
XSMini R56 080D0WQ eeprom virgin read needed Fordy51 3 184 14-01-2024, 11:28 AM
Last Post: Fordy51
  Q5 2017 eeprom edit Liveros 1 159 10-01-2024, 13:01 PM
Last Post: sejoharun

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content