Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Unable to code a new airbag control unit !!! VW10 5N0959655AA
09-08-2014, 22:36 PM,
Post: #1
ZSeat  Unable to code a new airbag control unit !!! VW10 5N0959655AA
Hello,
I hope and wish anyone can help me on this matter.

We have a Seat Leon 2008, which we've replaced the Airbag control unit because it have stored a fault code:

---------------------

Address 15: Airbags Labels: 5N0-959-655.lbl
Part No SW: 5N0 959 655 A HW: 5N0 959 655 A
Component: J234__A01 VW10 HI 1815
Revision: 19013000 Serial number: 0039DP6ED1QO
Coding: 0012337
Shop #: WSC 06402 785 00200
VCID: 3B7E38C57A2630C68E5-806E

Subsystem 1 - Serial number: 6333FTS630380888

Subsystem 2 - Serial number: 6343FTS646120888

Subsystem 3 - Serial number: 6353ETS6DN12TVNH

Subsystem 4 - Serial number: 6363ETS64L02TVNH

Subsystem 5 - Serial number: 00000000000000000

Subsystem 6 - Serial number: 00000000000000000

1 Fault Found:
00003 - Control Module
014 - Defective - MIL ON

Freeze Frame:
Fault Status: 11101110
Fault Priority: 2
Fault Frequency: 254
Reset counter: 110
Mileage: 127760 km
Time Indication: 0
Date: 2000.00.00

------------------------

We ordered the replacement at the delaer, they supplied 5N0959655AA/00D
Of course we used several times the code 00D/0D to try to code the unit, using the workshopcode 12345 or the stored on the older unit. Also after this, we tried a lot of codes 09,07 and a lot of them, and all of them are rejected.

Can you help us or do you know why the unit can't be coded?

Address 15: Airbags Labels: 5N0-959-655.lbl
Part No SW: 5N0 959 655 AA HW: 5N0 959 655 AA
Component: J234__ VW10 HI 2518
Revision: 27019000 Serial number: 003L7P4CLA8P
Coding: 0000000
Shop #: WSC 00000 000 00000
VCID: 7CFCFBD93FA8F7DADF-8029

Subsystem 1 - Serial number: 6332MTS630380888

Subsystem 2 - Serial number: 6342MTS646120888

Subsystem 3 - Serial number: 6351HTS6DN12TVNH

Subsystem 4 - Serial number: 6361HTS64L02TVNH

Subsystem 5 - Serial number: 00000000000000000

Subsystem 6 - Serial number: 00000000000000000

1 Fault Found:
01042 - Control Module; Not Coded
000 - -


Thanks in advance


Attached Files Thumbnail(s)
   
before-VSSZZZ1PZ8R110175-131680km-81822mi.txt
File Type: .txt
Downloaded: 14 times
Size: 9.45 KB

AFTER Log-VSSZZZ1PZ8R110175-132570km-82375mi new AA00D.txt
File Type: .txt
Downloaded: 13 times
Size: 8.31 KB

Quote this message in a reply
10-08-2014, 07:10 AM,
Post: #2
RE: Unable to code a new airbag control unit !!! VW10 5N0959655AA
Hi

Have you sent a log to Ross tech?

The index/ colour code doesn't appear in the new scan

Regards
Quote this message in a reply
10-08-2014, 07:36 AM,
Post: #3
RE: Unable to code a new airbag control unit !!! VW10 5N0959655AA
(10-08-2014, 07:10 AM)Sky walker Wrote:  Hi

Have you sent a log to Ross tech?

The index/ colour code doesn't appear in the new scan

Regards

Yes I did, but still no answer from they,
About the index colour I suppose not will appear until is not coded, of course the unit comes with the label with the index code attached. But all codes are rejected,

All codes are tried are from this table but this codes are for 1J0/6N0 units and until 2006...
Quote this message in a reply
10-08-2014, 08:32 AM,
Post: #4
RE: Unable to code a new airbag control unit !!! VW10 5N0959655AA
Read memory 95640 and send it here

If i helped DON'T forget THANKS thankyou & REPUTATION under
Quote this message in a reply
10-08-2014, 08:34 AM,
Post: #5
RE: Unable to code a new airbag control unit !!! VW10 5N0959655AA
(10-08-2014, 08:32 AM)seba100377 Wrote:  Read memory 95640 and send it here

How can I do that?
thank you!
Quote this message in a reply
10-08-2014, 08:47 AM,
Post: #6
RE: Unable to code a new airbag control unit !!! VW10 5N0959655AA
00 index for 5n0 959 655 family uses 0012336
Quote this message in a reply
10-08-2014, 09:28 AM,
Post: #7
RE: Unable to code a new airbag control unit !!! VW10 5N0959655AA
You need to remove airbag sensor from the car to open it and read the memory 95640 with the programmer; carprog,mprog ,etc.

If i helped DON'T forget THANKS thankyou & REPUTATION under
Quote this message in a reply
10-08-2014, 09:36 AM,
Post: #8
RE: Unable to code a new airbag control unit !!! VW10 5N0959655AA
(10-08-2014, 08:47 AM)Sky walker Wrote:  00 index for 5n0 959 655 family uses 0012336

Thanks, will try but this one is 0D index
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Peugeot 308 airbag crash clear bambi79 3 32 3 hours ago
Last Post: bambi79
0AirBag Micra airbag read issue al70 3 19 6 hours ago
Last Post: al70
ZVW Airbag module problem Need help! BMWFXX 2 84 25-03-2024, 19:49 PM
Last Post: BMWFXX
  Need Pinout help for VVDIPROG Renault 985109244R Airbag Ecu Dealirio 2 82 23-03-2024, 12:33 PM
Last Post: danocar
  DACIA DUSTER airbag reset enzoscod 1 49 21-03-2024, 23:07 PM
Last Post: volavka
KOpel AIRBAG OPEL INSIGNIA A 13578322 dunka100 1 62 20-03-2024, 06:48 AM
Last Post: danocar
  C5 x7 2008 airbag clear meszol 7 114 19-03-2024, 00:34 AM
Last Post: Nkhchyk
VToyota Кіа К5 2012 SRS acu code VasyaUA 0 50 13-03-2024, 21:55 PM
Last Post: VasyaUA
  Renault Megane 2 - 2003 , airbag wired scheme for you Yhoni 0 39 13-03-2024, 19:46 PM
Last Post: Yhoni
  CGDI CG70 airbag clear tool,Good- Bad results grmsek.damjan 1 195 08-03-2024, 15:05 PM
Last Post: sdade86

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content