Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Clon bsi posible ??
13-10-2019, 07:52 AM, (This post was last modified: 13-10-2019, 14:36 PM by Clusters.)
Post: #11
RE: Clon bsi posible ??
(12-10-2019, 23:32 PM)volavka Wrote:  
(12-10-2019, 19:23 PM)Ecutech Wrote:  Why not clone flash with upa and just swap the eeproms over?

There is no tool in market can read Flash from siemens BSI smile
CPU D76F0018GJ is absolutely locked 
The ONLY way is read/save backup of eeprom 95160 then swap it , 
in case not workedthen need to virgin 2nd hand bsi eeprom and align by diagbox

 
Best Regards V


I think there is a tool that can read and clone for this type of bsi, I don't have this tool.

Siemens D76F0018+95160 KLINE (BSI-E0X-00/BSI-F0X-00) . EEPROM 95160 R/W , show PIN


Attached Files
link.txt
File Type: .txt
Downloaded: 40 times
Size: 34 bytes

Quote this message in a reply
13-10-2019, 13:25 PM,
Post: #12
RE: Clon bsi posible ??
Thank you colleagues for the help, it is clearer to me. I have also vvdi prog. this one can read it .... but I will try to virginize and match with dialbox
Quote this message in a reply
13-10-2019, 13:49 PM, (This post was last modified: 13-10-2019, 14:36 PM by Clusters.)
Post: #13
RE: Clon bsi posible ??
(13-10-2019, 07:52 AM)tiguan Wrote:  I think there is a tool that can read and clone for this type of bsi, I don't have this tool.

Siemens D76F0018+95160 KLINE (BSI-E0X-00/BSI-F0X-00) . EEPROM 95160 R/W , show PIN

I/O terminal read/write EEP ONLY  under


Attached Files Thumbnail(s)
   

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
13-10-2019, 14:21 PM, (This post was last modified: 13-10-2019, 14:36 PM by Clusters.)
Post: #14
RE: Clon bsi posible ??
(13-10-2019, 13:49 PM)volavka Wrote:  
(13-10-2019, 07:52 AM)tiguan Wrote:  I think there is a tool that can read and clone for this type of bsi, I don't have this tool.

Siemens D76F0018+95160 KLINE (BSI-E0X-00/BSI-F0X-00) . EEPROM 95160 R/W , show PIN

I/O terminal read/write EEP ONLY  under

Correct, that's the way it is.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  gpeg2 or gpeg2a immo off posible? or get pin from eeprom dump NickMayer 5 234 06-01-2024, 07:01 AM
Last Post: raffy haddad
ZTAudi Its posible Audi rb8 to rb4 persix 0 513 20-03-2018, 17:32 PM
Last Post: persix
  Its posible Inmo off in Delphi 1.7L (hybrid ecu) anjo008 0 720 08-02-2018, 22:16 PM
Last Post: anjo008
ZVW Vw TOUAREG immmo off is posible? juancho18 4 1,208 30-10-2017, 02:14 AM
Last Post: juancho18
  Pin for edc15vm+ posible? kampu000 1 1,043 26-10-2017, 05:43 AM
Last Post: raffy haddad
  CARPROG clon rch11 10 5,791 17-10-2016, 13:26 PM
Last Post: rch11

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content