Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Re:(Solved) ISTA 4.19.40 error message block port 12300
12-10-2019, 23:21 PM, (This post was last modified: 14-10-2019, 20:36 PM by wademan.)
Post: #1
XZBMW  Re:(Solved) ISTA 4.19.40 error message block port 12300
I am attaching a picture of the error i am getting when using ISTA+D to program my car software version or reprogram a module. Never have this problem before using windows 10. I am use windows 7 Professional. Everything else works fine. Any information or help on this issue would be greatly appreciated thanks.


Attached Files Thumbnail(s)
   
Quote this message in a reply
13-10-2019, 07:30 AM,
Post: #2
RE: Re:ISTA 4.19.40 error message block port 12300
You either need to disable firewall or allow specific exes or ports through it.
Quote this message in a reply
14-10-2019, 00:33 AM,
Post: #3
XZBMW  RE: Re:ISTA 4.19.40 error message block port 12300
I turn off the firewall. The ISTA-D do communicate with the car and connect to the car. The only problem i am having now is it won't let me up update my car software version or if i replace one of the car module it won't let me reprogram it. i never have this issue before with the older version ISTA-D. I might have to go back to windows 10.
Quote this message in a reply
14-10-2019, 00:55 AM,
Post: #4
RE: Re:ISTA 4.19.40 error message block port 12300
I used to have this issue, I turned my firewall off and everything was fine again
Quote this message in a reply
14-10-2019, 06:24 AM,
Post: #5
RE: Re:ISTA 4.19.40 error message block port 12300
How did you manage running 4.19 on XP? I guess that is potentially possible with some hacking, but xp doesn't even officially supports .net 4.7!

Anyway that message tells you that ICOM can't "call back" your computer on that port. So if you are sure you disabled firewall, then something in your network (or windows) is screwed.
Quote this message in a reply
14-10-2019, 06:42 AM,
Post: #6
RE: Re:ISTA 4.19.40 error message block port 12300
XP is bad idea as Node said .
Quote this message in a reply
14-10-2019, 10:02 AM,
Post: #7
RE: Re:ISTA 4.19.40 error message block port 12300
And officialkly not supported
Quote this message in a reply
14-10-2019, 20:00 PM, (This post was last modified: 14-10-2019, 20:40 PM by wademan.)
Post: #8
XZBMW  RE: Re:ISTA 4.19.40 error message block port 12300
(14-10-2019, 06:24 AM)Node Wrote:  How did you manage running 4.19 on XP? I guess that is potentially possible with some hacking, but xp doesn't even officially supports .net 4.7!

Anyway that message tells you that ICOM can't "call back" your computer on that port. So if you are sure you disabled firewall, then something in your network (or windows) is screwed.

 Sorry my mistake. I am running window 7 pro not windows XP.

Thank you guys for your help. I turn my firewall off and now all the features are working in ISTA-D. I do appreciated the information.
Quote this message in a reply
14-10-2019, 20:53 PM, (This post was last modified: 14-10-2019, 20:59 PM by Jumper.)
Post: #9
RE: Re:(Solved) ISTA 4.19.40 error message block port 12300
No programming because firewall and antivir. Problem was solved from 4.16.2. You can also add an exception to your firewall.
"C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\TesterGUI\bin\Release\ISTAGUI.exe"
"C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\TesterGUI\bin\Release\IstaServicesHost.exe"
"C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\TesterGUI\bin\Release\IstaOperation.exe"
"C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\PSdZ\host\PsdzServiceHost.exe"
"C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\FSCValidHost\FscValidationHost.exe"
Quote this message in a reply
14-10-2019, 21:03 PM,
Post: #10
XZBMW  RE: Re:(Solved) ISTA 4.19.40 error message block port 12300
(14-10-2019, 20:53 PM)myfirst1er Wrote:  No programming because firewall and antivir. Problem was solved from 4.16.2. You can also add an exception to your firewall.
"C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\TesterGUI\bin\Release\ISTAGUI.exe"
"C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\TesterGUI\bin\Release\IstaServicesHost.exe"
"C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\TesterGUI\bin\Release\IstaOperation.exe"
"C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\PSdZ\host\PsdzServiceHost.exe"
"C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\FSCValidHost\FscValidationHost.exe"

Thank you for the this information. I turn off my firewall and my ISTA-D start working fine.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ista 4.46 Standalone kiranabc 26 2,678 47 minutes ago
Last Post: edtech
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 254 2 hours ago
Last Post: RaoulK1998
  BMW E83 A1 error - MRS: No message from DSC ... ivanp 22 902 Yesterday, 22:09 PM
Last Post: ivanp
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,230 Yesterday, 20:02 PM
Last Post: Node
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,646 626,446 Yesterday, 16:29 PM
Last Post: Sedoy
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,401 Yesterday, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 116 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 154 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 659 25-03-2024, 08:11 AM
Last Post: Node
  F15 6WB Retrofit VIN Error moreply 4 173 25-03-2024, 07:24 AM
Last Post: RuleNormaliai

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content