Possibly Related Threads…

***karmazyn*** · 14-10-2019, 07:53 AM,

Hello I try to connect radio from Nissan on the bench and I can not get to working so I need some help to get pinout

***gpdriver*** · 14-10-2019, 08:18 AM,

hereUgo ................................

***karmazyn*** · (This post was last modified: 14-10-2019, 09:08 AM by karmazyn.)

Thank you so
pin 19 BATTERY
pin 40 IGN
pin 20 GND

What is the pinout for this connector?

***gpdriver*** · (This post was last modified: 14-10-2019, 10:23 AM by gpdriver.)

(14-10-2019, 08:55 AM)karmazyn Wrote: Thank you so
pin 19 BATTERY
pin 40 IGN
pin 20 GND

What is the pinout for this connector?

look on m48 and m49

***karmazyn*** · (This post was last modified: 14-10-2019, 11:00 AM by karmazyn.)

Hello yes this is good connection but the Radio switch on for 5 sec and off and now the radio is no working. Is there any fuse that can be demage?

***gpdriver*** · 14-10-2019, 12:24 PM,

(14-10-2019, 10:52 AM)karmazyn Wrote: Hello yes this is good connection but the Radio switch on for 5 sec and off and now the radio is no working. Is there any fuse that can be demage?

need CAN sig. from BCM

***karmazyn*** · 14-10-2019, 12:38 PM,

ok but I thing something was happened that the radio was on for 3 sec and off and now is not responding

***mhamid56*** · (This post was last modified: 23-10-2019, 06:35 AM by mhamid56.)

Hi all members
I need your help and experiences in replacing Display Audio unit (without navigation) to Nissan Connect 3 (LCN2) in Nissan Qashqai 2018, 1.2 Dig-T Tekna.
Because the wiring is different I did an adaptor
All things working good, except the camera (4cameras) not working.
Any detailed informations and wiring diagrams upon your request.
Thank you in advance

***mhamid56*** · 23-10-2019, 14:36 PM,

I need your support Mr.gpdriver and Mr.karmazyn to discover the fault in wiring connection
I will send the diagram of the adaptor for revising connection

***karmazyn*** · (This post was last modified: 24-10-2019, 11:38 AM by karmazyn.)

Today I try connect the used radio with emulator from codecard but is not working still the same on the screen.
So now I need to try to repair the oryginal radio. I find two components defect. One is IC chip 610LV AA,
second one is 2M400FDA. Is somebody with experience to fix this king of radio?

And here is the picture of emulator connect on the board.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Renault Radio Code offline Calculator	fiazhnd	433	77,453	5 hours ago Last Post: raffy haddad
	Q5 Gateway pinout	TheJake	2	128	Yesterday, 10:32 AM Last Post: europhon
	Renault Radio Code By VIN	volavka	167	66,374	Yesterday, 10:31 AM Last Post: corfumadness
	need fiat radio code	testourii	7	2,113	24-01-2021, 16:13 PM Last Post: miim113
	ford radio blaupunkt code	brent48	5	327	24-01-2021, 13:26 PM Last Post: Shooting
	MIB STD2 PQ+NAV Pinout + emergency mode	Hater	5	269	24-01-2021, 11:28 AM Last Post: Thegrimreaper
	Radio renault scenic II cabasse code	viytik	0	84	23-01-2021, 08:42 AM Last Post: viytik
	Need Audi RMC emmc pinout	Krafeusse	2	228	21-01-2021, 15:02 PM Last Post: Krafeusse
	Nissan PP-2609T Code and secure	Tom_x	2	111	21-01-2021, 06:12 AM Last Post: Tom_x
	Iveco Daily Bosch radio code	kistigris80	5	1,854	19-01-2021, 18:10 PM Last Post: masterskay62

New Emulator

Julie Emulator

Immo Bypass

AUTO-CHIPS

HEXPROG

moe diatronik

Contact Us