Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Mechatronic units compatibility
17-10-2019, 16:01 PM, (This post was last modified: 18-10-2019, 11:30 AM by phydor.)
Post: #1
ZVW  Mechatronic units compatibility
Hi there guys, what is the compatibility between DSG7 mechatronic units?
Can I replace a 0AM 325 025 H ZE1 (my car, Passat B7 2013) with a 0AM 325 025 H ZJP (Skoda Rapid 2014)?
I suppose that ZE1 or ZJP correspond to different gearbox codes?
I just need to replace the unit and flash it to latest version for my gearbox?
Quote this message in a reply
17-10-2019, 20:05 PM,
Post: #2
RE: Mechatronic units compatibility
(17-10-2019, 16:01 PM)phydor Wrote:  Hi there guys, what is the compatibility between DSG7 mechatronic units?
Can I replace a 0AM 325 025 H ZE1 (my car, Passat B7 2013) with a 0AM 325 025 ZJP (Skoda Rapid 2014)?
I suppose that ZE1 or ZJP correspond to different gearbox codes?
I just need to replace the unit and flash it to latest version for my gearbox?

under 

No !!! , You make wrong job. Not that is solution. What is damaged and why you changhing DSG Unit ?
Quote this message in a reply
18-10-2019, 10:12 AM, (This post was last modified: 18-10-2019, 10:14 AM by phydor.)
Post: #3
RE: Mechatronic units compatibility
(17-10-2019, 20:05 PM)ototest Wrote:  
(17-10-2019, 16:01 PM)phydor Wrote:  Hi there guys, what is the compatibility between DSG7 mechatronic units?
Can I replace a 0AM 325 025 H ZE1 (my car, Passat B7 2013) with a 0AM 325 025 ZJP (Skoda Rapid 2014)?
I suppose that ZE1 or ZJP correspond to different gearbox codes?
I just need to replace the unit and flash it to latest version for my gearbox?

under 

No !!! , You make wrong job. Not that is solution. What is damaged and why you changhing DSG Unit ?

Because of these attached errors.Checked also the pressures while idling.Nothing out of the ordinary.
Either, i replace the hydraulic accumulator, either I replace the mechatronic unit.I have another one that ends by ZE3, i think.


Attached Files Thumbnail(s)
                   
Quote this message in a reply
[+] 1 user says Thank You to phydor for this post
19-10-2019, 15:17 PM,
Post: #4
RE: Mechatronic units compatibility
The problem when mixing this gearbox is the component protection for running properly. Maybe the engine starts, try to set the basics settings and adaptations values for move the car, but need a reflash unit and match with the bcm/Immo.
Quote this message in a reply
19-10-2019, 18:31 PM,
Post: #5
RE: Mechatronic units compatibility
(19-10-2019, 15:17 PM)JorBo Wrote:  The problem when mixing this gearbox is the component protection for running properly. Maybe the engine starts, try to set the basics settings and adaptations values for move the car, but need a reflash unit and match with the bcm/Immo.
But I ll reflash the unit with the latest flashfile for my gearbox and i ll remove cp online.
Quote this message in a reply
23-10-2019, 17:01 PM,
Post: #6
RE: Mechatronic units compatibility
(19-10-2019, 18:31 PM)phydor Wrote:  
(19-10-2019, 15:17 PM)JorBo Wrote:  The problem when mixing this gearbox is the component protection for running properly. Maybe the engine starts, try to set the basics settings and adaptations values for move the car, but need a reflash unit and match with the bcm/Immo.
But I ll reflash the unit with the latest flashfile for my gearbox and i ll remove cp online.

-The P0841 DTCs is a common issue from the mechatronics units on this gearboxs. 
-Any DTCs after reflash the unit?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  03G906021QA compatibility Inovator 2 232 14-06-2023, 21:27 PM
Last Post: oscar89
  abs pump compatibility bboctavian 2 386 20-10-2022, 15:25 PM
Last Post: bboctavian
ZVW DSG 7 0AM mechatronic issue phydor 7 947 11-10-2019, 20:15 PM
Last Post: phydor
  VW 0AM TRANSMISSION MECHATRONIC SWAP Shinehead 1 455 13-04-2019, 09:56 AM
Last Post: Senario
ZSkoda Skoda DSG7 DQ200 mechatronic michalkow 1 657 04-10-2018, 09:59 AM
Last Post: ototest
ZVW Mechatronic Poloman 4 2,729 26-08-2014, 13:22 PM
Last Post: Poloman

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content