Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA-D and ISTA-P not Working!
17-10-2019, 20:08 PM,
Post: #1
XZBMW  ISTA-D and ISTA-P not Working!
Hello community,

I have installed ISTA-D and ISTA-P on my computer, but when I try connect to my car with K+DKAN cable nothing happens.

I have on my computer NCS Expert and INPA and these tools is working very well (NCS Expert, INPA and WinKFP).

I use the same EDIABAS to use these tools, I've checked on youtube and suposly these two different tools is compatible without problems, and I followed the installation instructions carefully.

I'm using COM1 port (I already tryed with COM9 but unsuccessfully).

Someone with the same problem?

ISTA-D ERROR:
[Image: bjbwCd4.png]

ISTA-P ERRORS:
[Image: iAiOxvp.png]

[Image: Gqejhdy.png]
Quote this message in a reply
17-10-2019, 20:40 PM,
Post: #2
RE: ISTA-D and ISTA-P not Working!
Can you post picture from ista+ settings -- interface
Quote this message in a reply
17-10-2019, 21:11 PM,
Post: #3
RE: ISTA-D and ISTA-P not Working!
what is the car??
Visit this user's website
Quote this message in a reply
17-10-2019, 21:29 PM, (This post was last modified: 17-10-2019, 21:30 PM by JoaoVaranda.)
Post: #4
RE: ISTA-D and ISTA-P not Working!
(17-10-2019, 20:40 PM)snypertje Wrote:  Can you post picture from ista+ settings -- interface

Sure

[Image: s7DM2PV.png]

(17-10-2019, 21:11 PM)obdcloud Wrote:  what is the car??

BMW E46 320D 150HP
Quote this message in a reply
17-10-2019, 21:55 PM, (This post was last modified: 17-10-2019, 21:56 PM by user0086.)
Post: #5
RE: ISTA-D and ISTA-P not Working!
To which port did you connect the cable? OBD2 or the 20-pin round BMW connector? Can you access all modules with INPA / NCS Expert?
Quote this message in a reply
17-10-2019, 21:57 PM, (This post was last modified: 17-10-2019, 22:01 PM by JoaoVaranda.)
Post: #6
RE: ISTA-D and ISTA-P not Working!
(17-10-2019, 21:55 PM)user0086 Wrote:  To which port did you connect the cable? OBD2 or the 20-pin round BMW connector? Can you access all modules with INPA / NCS Expert?

OBD2

By the way, the 20 pin has problems with that?

Yes, I can.
Quote this message in a reply
18-10-2019, 04:07 AM,
Post: #7
RE: ISTA-D and ISTA-P not Working!
Try Workaround:

1. open Session in ISTA with your VIN
2. if all Ok, connect to Car
3. make complete identification

iLean offline license (PM)
FeatureCodes CarPlay (PM)
FSC-Generator
Quote this message in a reply
18-10-2019, 19:49 PM,
Post: #8
RE: ISTA-D and ISTA-P not Working!
(18-10-2019, 04:07 AM)Sedoy Wrote:  Try Workaround:

1. open Session in ISTA with your VIN

I have inserted my VIN but it still with same problem.


(18-10-2019, 04:07 AM)Sedoy Wrote:  Try Workaround:

3. make complete identification

I have tested, but not working.
Quote this message in a reply
19-10-2019, 13:32 PM,
Post: #9
RE: ISTA-D and ISTA-P not Working!
(18-10-2019, 19:49 PM)JoaoVaranda Wrote:  
(18-10-2019, 04:07 AM)Sedoy Wrote:  Try Workaround:

1. open Session in ISTA with your VIN

I have inserted my VIN but it still with same problem.


(18-10-2019, 04:07 AM)Sedoy Wrote:  Try Workaround:

3. make complete identification

I have tested, but not working.

Which model year is the car? If it's before 2001 it has the round connector under the hood and it should be used per BMW official instructions. If a BMW has the round connector under the hood, it's the only one that is connector to all modules.

Which Ediabas is installed?
Quote this message in a reply
19-10-2019, 14:05 PM,
Post: #10
RE: ISTA-D and ISTA-P not Working!
(19-10-2019, 13:32 PM)Spirit5676 Wrote:  Which model year is the car? If it's before 2001 it has the round connector under the hood and it should be used per BMW official instructions. If a BMW has the round connector under the hood, it's the only one that is connector to all modules.

Which Ediabas is installed?

Is BMW E46 320D 150HP from 2002.

Him has OBD2 connector.

My EDIABAS version is: 7.3.0
My ISTA-D version is: 4.19.40
My ISTA-P version is: 3.66.0.200
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ista 4.46 Standalone kiranabc 30 2,756 8 minutes ago
Last Post: edtech
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 271 4 hours ago
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,248 Yesterday, 20:02 PM
Last Post: Node
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,646 627,135 Yesterday, 16:29 PM
Last Post: Sedoy
  e90 central locking not working ELMEPRO 8 108 Yesterday, 11:04 AM
Last Post: bboctavian
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,406 Yesterday, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 118 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 155 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 659 25-03-2024, 08:11 AM
Last Post: Node
  FEM Not working with ENET but works wtih DCAN armenh7 0 49 25-03-2024, 00:04 AM
Last Post: armenh7

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content