[gunio]

Hello,
I was trying to make a spare key today using new option in VVDI2 to program key via obd2 in CAS4.
To do that the tool has to unlock the CAS unit but with my version first it asked for upgrade. So I started the upgrade and the time error showed on the 2nd level of flashing.
I tried several more times but no luck.
Can you please give me some advice how to repair the unit?
I attached the files from the CAS4 unfortunately I read them after the flashing via obd2 failed


The car is F10 from 2011. The CAS in number 4.

Module details:
61.35-9 257 038.9-01
CAS4 CG
Continental
5WK50322LBR
2111231461


I tried several p-flash files, as I thought that it would solve the problem. Unfortunately non of them I found did not help.

I am not familiar with the CAS4 system, and just wonder if any cas4 module with the key, even from the different car would turn on the igniton in my car?
Can anyone tell me if there is a tool that could help me in programming 2nd hand CAS module in that vehicle?

Thanks

[rs@chip]

If failed on upgrade on half you can save it with esys..yust upgrade cas and will be ok. If not have to find same part no. p-flash

[krug]

Hello,
I was trying to make a spare key today using new option in VVDI2 to program key via obd2 in CAS4.
To do that the tool has to unlock the CAS unit but with my version first it asked for upgrade. So I started the upgrade and the time error showed on the 2nd level of flashing.
I tried several more times but no luck.
Can you please give me some advice how to repair the unit?
I attached the files from the CAS4 unfortunately I read them after the flashing via obd2 failed


The car is F10 from 2011. The CAS in number 4.

Module details:
61.35-9 257 038.9-01
CAS4 CG
Continental
5WK50322LBR
2111231461


I tried several p-flash files, as I thought that it would solve the problem. Unfortunately non of them I found did not help.

I am not familiar with the CAS4 system, and just wonder if any cas4 module with the key, even from the different car would turn on the igniton in my car?
Can anyone tell me if there is a tool that could help me in programming 2nd hand CAS module in that vehicle?

Thanks

 Hi where are you based  ?
I may  help you

[gunio]

Can you please share the p-flash for my cas?
I tried good  few of them and non of them works.

Can anyone could recommend the Esys soft and cable seller, please?

[gunio]

Problem SOLVED. 
Just to let you know.
I wrote back original corrupted files, i did once again upgrade with vvdi2 and this time it finished successfully.
I had to restore coding and the car started. 
Thanks to everyone.