Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
AK90+ EWS4.4 Strange Problem...
21-10-2019, 01:11 AM,
(This post was last modified: 21-10-2019, 01:11 AM by jtanner.)
Post: #1
|
|||
|
|||
AK90+ EWS4.4 Strange Problem...
I have the AK90+ software, using AK90+ 3.19 software. I also have the EWS4 adapter so I don't have to solder wires each time.
I can read the EWS4 fine, I was able to unlock a key and write back to the EWS module. I was also able to read the data, save the bin, then write the data to a different EWS4 module (effectively cloning it) and it worked... so far so good, BUT, and here's where I'm having a weird problem. I want to add new keys, I tick 2 boxes that were unused to add the keys. I write back to EWS, it takes a little while and says "Write OK". But it doesn't actually do anything... as in, the 2 new keys I added are NOT in fact added. They are not ticked when I re-read the EWS, and putting the module in the car, only the original keys work (as expected) but not the new ones. No matter what I do or try, it never "accepts" new keys even though it says "Write OK". What I can't figure out, is, how come locking/unlocking a "used" key works, how come I can clone the EWS data to a different EWS module -> Proving that the Writing IS writing, and yet it refuses to actually ADD a new key Has anyone come across this before? If it makes any difference, the EWS4 module is from a 2008 BMW Z4 E86 Password for anything I share here is: jtanner_IAmOrion_cartechnology.co.uk
|
|||
21-10-2019, 07:01 AM,
Post: #2
|
|||
|
|||
RE: AK90+ EWS4.4 Strange Problem...
The new key is made by dump but not in the reverse order.
If you are trying to write a key to a dump, then you most likely will have a different password. |
|||
21-10-2019, 08:09 AM,
Post: #3
|
|||
|
|||
RE: AK90+ EWS4.4 Strange Problem...
(21-10-2019, 07:01 AM)kulibih Wrote: The new key is made by dump but not in the reverse order. Huh?? I've coded about 30+ vehicles all EWS3 perfectly fine. I would read the EWS, save the bin file, Write to the new keys, Tick the new key boxes I intended to add then write back to the EWS. You have to write back to the EWS so it knows that the new keys you've added are active. I'm using the same process I have done many times before. Also, what password do you refer to? There's no mention of passwords within the software and no way to enter a password even if I wanted. I've never been asked or had to do anything password related Password for anything I share here is: jtanner_IAmOrion_cartechnology.co.uk
|
|||
21-10-2019, 17:34 PM,
(This post was last modified: 21-10-2019, 17:36 PM by raffy haddad.)
Post: #4
|
|||
|
|||
RE: AK90+ EWS4.4 Strange Problem...
I have made lots also of ews keys but not write anything back to ews
The key data in ews the device writ to key the corresponding data and not reverse except if the key is id 46 like in range rover Is your ews 2l86 or 9s12d128? Regards Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
21-10-2019, 18:04 PM,
Post: #5
|
|||
|
|||
RE: AK90+ EWS4.4 Strange Problem...
and lately my ak 90 is amking a key no problem it show bmw key and key niumber when i read it , but no vin number or millage from key data , but when i make a key with zedbull using the ews data i read with ak90 the key is good , so seems like ak90 is getting old
|
|||
21-10-2019, 18:13 PM,
Post: #6
|
|||
|
|||
RE: AK90+ EWS4.4 Strange Problem...
Ues even of no vin or mileage it still start the car
I also encouter this but never had a problem starting car Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
25-10-2019, 18:29 PM,
Post: #7
|
|||
|
|||
RE: AK90+ EWS4.4 Strange Problem...
ak90 not work with ews4.4
ar90 crash dump ews 4.4 |
|||
28-10-2019, 20:38 PM,
Post: #8
|
|||
|
|||
RE: AK90+ EWS4.4 Strange Problem...
Ak90+ only support EWS4.3 not EWS4.4
You are lucky that the car starts. AutoKodowanie - coding - programming - navigations - retrofit.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Help replacing ews4.3 with EWS3 SW08 | elioc9 | 0 | 27 |
20-04-2024, 14:02 PM Last Post: elioc9 |
|
CAS2 To CAS3 - Data transfer - Coding FA Problem | Semi14 | 2 | 103 |
18-04-2024, 07:10 AM Last Post: Semi14 |
|
Golf 5 Immo problem after swap Vistreon -> VDO | kafkaesk | 22 | 736 |
16-04-2024, 14:19 PM Last Post: kafkaesk |
|
cheeroke 2013 skim problem | ka_rai | 0 | 35 |
01-04-2024, 14:50 PM Last Post: ka_rai |
|
Mercedes C180 immo problem | al70 | 5 | 189 |
01-04-2024, 10:01 AM Last Post: ROD-BENDERS |
|
Volvo XC90 CEM problem | pimpammm | 0 | 71 |
28-03-2024, 18:52 PM Last Post: pimpammm |
|
Solved ✔ Problem Mini Cas3+ akl | samirfe | 4 | 212 |
21-03-2024, 15:01 PM Last Post: samirfe |
|
Solved ✔ Cas2 up cas3+ problem | johann74270 | 1 | 105 |
19-03-2024, 23:51 PM Last Post: johann74270 |
|
Beetly 5C 2012 immo/dash problem | Arczi26 | 2 | 113 |
13-03-2024, 14:51 PM Last Post: Arczi26 |
|
front sam A2045454601 problem | starprog | 0 | 77 |
12-03-2024, 13:50 PM Last Post: starprog |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content