Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
A6 4B 2.5 TDI: Adapt Injection Pump to IMMO 2
21-10-2019, 08:00 AM,
(This post was last modified: 21-10-2019, 08:01 AM by Tabaluga.)
Post: #1
|
|||
|
|||
A6 4B 2.5 TDI: Adapt Injection Pump to IMMO 2
Hi,
I have an Audi A6 4B and want to replace/adapt the broken Injection Pump. Cluster: 4B0 920 900 JX ECU: 4B2 907 401 B My Problem: I don`t know how to adapt an Immo 2 ECU to an Injection Pump (part number was ordered for VIN, so this fits) I tried to read out both pins (ECU/Cluster) and use Guided Functions from VVDI for Adapting Injection Pump, but Pin of ECU I previously read out was 65535 (so FFFF) and therefore Adapting doesn`t work. Reading the Pin of Cluster seams to give the right result. Can somebody help me and tell me how to adapt the injection pump or tell me the ECU Pin (EDC15)? Thanks in advance Regards |