Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Vito w639 EDC 16C2-7.31. pinout needed
|
21-10-2019, 12:01 PM,
Post: #1
|
|||
|
|||
|
Vito w639 EDC 16C2-7.31. pinout needed
Hello,
I got problem with Vito 2.1L 2006. Car does not turn starter at all! Key is OK, Steering lock unlocked, drive autorization is OK but starter does not turn. Starter was checked on desk it works. I re solder k40 module with fusebox totaly no results. DAS is not seeing any problem and start is enable in parameters. Does sombody know how these starter is connected? Thanks! |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
21-10-2019, 12:33 PM,
Post: #2
|
|||
|
|||
RE: Vito w639 EDC 16C2-7.31. pinout needed
(21-10-2019, 12:01 PM)tihiuvek Wrote: Hello, |
