Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Xhorse vvdi bmw tool Technical Support & Feedback
23-10-2019, 14:12 PM,
Post: #1
XZBMW  Xhorse vvdi bmw tool Technical Support & Feedback
Hi CT and xhorse fans undefined,

just i got my VVDI BMW TOOL, and want open this Thread for share Your Experience with it


Currently it is not possible to code or read the FA car of the 2004 E60.

But the 2009 car from CAS3 was able to be read from FA

AutoKodowanie - coding - programming - navigations - retrofit.
Quote this message in a reply
23-10-2019, 19:00 PM, (This post was last modified: 23-10-2019, 19:01 PM by huzionet.)
Post: #2
RE: Xhorse vvdi bmw tool Technical Support & Feedback
Support instrument cluster memory M35080 v6 - done

AutoKodowanie - coding - programming - navigations - retrofit.
Quote this message in a reply
24-10-2019, 23:59 PM,
Post: #3
RE: Xhorse vvdi bmw tool Technical Support & Feedback
(23-10-2019, 14:12 PM)huzionet Wrote:  Hi CT and xhorse fans undefined,

just i got my VVDI BMW TOOL, and want open this Thread for share Your Experience with it


Currently it is not possible to code or read the FA car of the 2004 E60.

But the 2009 car from CAS3 was able to be read from FA

Same here. Can identify car, but reading FA/VO fails. Entering FA manually shows only blank tables. Tried on bench setup with cas3++

Yesterday released new version 1.4.3 but no change.... Emailed to xhorse support and wait for reply....
Quote this message in a reply
25-10-2019, 11:33 AM, (This post was last modified: 25-10-2019, 11:35 AM by huzionet.)
Post: #4
RE: Xhorse vvdi bmw tool Technical Support & Feedback
Hi airbone, it's the same with me.
For now I'm afraid to do something more serious because it's possible that they are constantly making corrections. Have you done anything else?

Best Regards.

Reading FA F series from file xml from e-sys - fail

AutoKodowanie - coding - programming - navigations - retrofit.
Quote this message in a reply
25-10-2019, 20:49 PM, (This post was last modified: 25-10-2019, 20:49 PM by airbone.)
Post: #5
RE: Xhorse vvdi bmw tool Technical Support & Feedback
Yes looks like they started to sell before that thing is really tested and working on a whole range as advertised. You say you were able to read fa from e60 2009. It means that provided logistic/coding files may be not correct.... not sure how programming is supposed to work... as bmw configuration file is only 1.3gb, it must be only coding data, and programming data must be obtained online.
I have not tried anything else. Please post whatever you try, whether it works or not.
Have u tries to make any keys? I need that thing mainly for making keys, but I would be very happy if coding/programming function would work since from pictures it looked to be easier and more-straight forward than working with esys/ncs. I mostly work “on the bench” and i need to default-code units without vehicle available, also same situation with key-making for car-services these will ship required units....
About reading fa from xml file - not sure if bmw tool is supposed to read it from esys xml file. I did not try but I thought it was only able to read fa from a self-made (saved by bmw tool) file.
Quote this message in a reply
26-10-2019, 14:08 PM,
Post: #6
RE: Xhorse vvdi bmw tool Technical Support & Feedback
We are the first people who have this equipment, because at the beginning I had information that it will be at the end of the year and we already have it. I was able to connect and code the test kit I built with cas3, kgm, kombi, ahl, where communication is via d-can cable. I was able to code two controllers and program the meter. In fact, before these activities, the program downloaded data from the internet. Today I tried to connect to E83 and failed, and should also code this car. We managed to change the mileage in CAS3 + through obd and change the mileage from read m35080v6 memory. For now, I have not tried to do more on the car.

AutoKodowanie - coding - programming - navigations - retrofit.
Quote this message in a reply
29-10-2019, 16:52 PM,
Post: #7
RE: Xhorse vvdi bmw tool Technical Support & Feedback
Key programming in 2004 E60 with CAS2 successful.

AutoKodowanie - coding - programming - navigations - retrofit.
Quote this message in a reply
30-10-2019, 07:14 AM,
Post: #8
RE: Xhorse vvdi bmw tool Technical Support & Feedback
Yes, seems like they need to tinker with that software yet to get everything fully working... i was asking for help and instead, they getting me in connection with some of their engineers via wechat. Lets see afterwards.
I need to add key for a cas3++, have working key. I think I need to read eeprom by vvdi programmer and make it from file, or is there any other safe way?
Quote this message in a reply
30-10-2019, 08:32 AM,
Post: #9
RE: Xhorse vvdi bmw tool Technical Support & Feedback
It's probably a safe way, but apparently vvdibmw also does it via OBD, but do you have so much courage smile?

AutoKodowanie - coding - programming - navigations - retrofit.
Quote this message in a reply
[+] 1 user says Thank You to huzionet for this post
30-10-2019, 10:11 AM,
Post: #10
RE: Xhorse vvdi bmw tool Technical Support & Feedback
Well thats just cas being used for bench testing, so i will not screw up anybody’s car... if I make flash and eeprom dumps with vvdiprog, and something goes bad, can i recover to previous state by writing eep/flash dump back?
Btw i have been added to some secret “support chat group with vvdi engineers”. Lets see what they got for us...
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  CGDI BMW Keytool Feedback ROD-BENDERS 71 28,492 24-03-2024, 21:11 PM
Last Post: Cerhio
0Immo NEW EASY IMMO DOCTOR 2.1 Multi Immo Tool.+ KG ROD-BENDERS 44 10,088 17-03-2024, 14:52 PM
Last Post: kar407
  cas3 9389115 downgrade fail - vvdi keytoolplus motorsoft 2 116 14-03-2024, 10:08 AM
Last Post: sixcode
  OPEL grandland Med17.4.4 need pinout and recomand tool to read fadyeid 0 46 11-03-2024, 16:12 PM
Last Post: fadyeid
  Key Programming Tool koziol 1 127 06-03-2024, 07:22 AM
Last Post: TKservice
0Immo Car-Edit tool - dash ecu bsm srs immo ROD-BENDERS 31 8,407 05-03-2024, 21:01 PM
Last Post: keyzex
  VAG IMMO OFF TOOL for free josef1708 6 1,836 03-03-2024, 09:42 AM
Last Post: josef1708
  Solved ✔ Need help with Xhorse XEB510EN B5 Remote nadelhubgeber 5 159 24-02-2024, 15:03 PM
Last Post: nadelhubgeber
TMisubshi Need support for MH141557 immo ecu virgin file ste821 0 55 20-02-2024, 20:38 PM
Last Post: ste821
KOpel Upa Script to read Opel Immo Pin 29F400 or tool meszol 0 97 08-02-2024, 12:09 PM
Last Post: meszol

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content