Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BCM2 D70F3634 how to read
23-10-2019, 20:54 PM,
Post: #1
|
|||
|
|||
BCM2 D70F3634 how to read
Does anyone know how and what to read is the MCU. We have an Audi Q5 from 2015 and we can't read the eeprom. I have already tried VVDI prog and also after VVDI2 OBD. Is there any tool what it reads? I read the topics from 2018 and also someone had a problem but maybe there is already a solution.
|
|||
23-10-2019, 21:17 PM,
Post: #2
|
|||
|
|||
RE: BCM2 D70F3634 how to read
I think read impossible at this moment
i read somewhere orange5 can read/write but not sure about , get dealer key maybe good option for you Regards BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
23-10-2019, 22:01 PM,
Post: #3
|
|||
|
|||
RE: BCM2 D70F3634 how to read
yes like volavka sayed bcm2 after 2014 fully locked mcu and very dificul to do.. cheapest option new key from dealer I think
|
|||
24-10-2019, 07:07 AM,
Post: #4
|
|||
|
|||
RE: BCM2 D70F3634 how to read
And when I have a working key, is it possible to make a second one? Or there is no way. I am asking for the future.
|
|||
24-10-2019, 20:46 PM,
Post: #5
|
|||
|
|||
RE: BCM2 D70F3634 how to read
you stil need dump
|
|||
24-10-2019, 21:20 PM,
Post: #6
|
|||
|
|||
RE: BCM2 D70F3634 how to read
buy ioterminal multitool
read write by obd full clone |
|||
25-10-2019, 10:38 AM,
Post: #7
|
|||
|
|||
RE: BCM2 D70F3634 how to read
VVDI PROG Click the "Reset Sec" will unlock the chip and erase all data in the chip!!!
If the dialog info is "Reading...(0%) Read Error" It means the chip is encrypted and can not read data |
|||
25-10-2019, 17:41 PM,
Post: #8
|
|||
|
|||
RE: BCM2 D70F3634 how to read
Would VAG helper be helpful here?
I also read about the solution to create an older BCM, e.g. from 2013, which is not encrypted. Then encode it with Odis Online and then read the data from this new BCM2. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content