Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Audi MMI3G High (HNav) - MMI 3GP (HN+) 6.33.1 - 8R0051884JD - 2021/2022
18-04-2022, 12:09 PM,
(This post was last modified: 18-04-2022, 13:06 PM by BS68.)
Post: #41
|
|||
|
|||
RE: Audi MMI3G High (HNav) - MMI 3GP (HN+) 6.33.1 - 8R0051884JD - 2021/2022
(18-04-2022, 10:51 AM)playaz187 Wrote: u did region convertion? Hi dear friend Playaz187, no I bought the vehicle as such, the seller did not tell me in detail the cause of the problem. Thank you. Since i can't see anything on the display screen, it's hard for me to know what I'm doing |
|||
18-04-2022, 15:19 PM,
Post: #42
|
|||
|
|||
RE: Audi MMI3G High (HNav) - MMI 3GP (HN+) 6.33.1 - 8R0051884JD - 2021/2022
(18-04-2022, 12:09 PM)BS68 Wrote:(18-04-2022, 10:51 AM)playaz187 Wrote: u did region convertion? 1. Why are you yelling at the forum, you think it helps 2.This happens if you tried to change the region, ie insert other firmware that is not factory installed for that region ( for example changes from the US to the EU region) If you like my post and it helped you, press Thanks or Reputation
|
|||
Reputation: +1 - BS68 [+1] | |||
18-04-2022, 15:54 PM,
Post: #43
|
|||
|
|||
RE: Audi MMI3G High (HNav) - MMI 3GP (HN+) 6.33.1 - 8R0051884JD - 2021/2022
Thank you dear friend Audia4
I apologize for the large letters inserted by mistake surely. Ok thank you again for the very useful information My respects to you Audia4 I will do some research about changing the region, i think you should read the eeprom in order to add or remove the region no compatible ? It's not going to be easy but I'll do some research to find out if it's possible to read the eeprom via VCP (version 6) Thanks again. |
|||
19-04-2022, 19:26 PM,
Post: #44
|
|||
|
|||
RE: Audi MMI3G High (HNav) - MMI 3GP (HN+) 6.33.1 - 8R0051884JD - 2021/2022
Hi friends
I managed to enter the "green menu", all region options were on [EU] 2/7 Find current firmware... Then i installed the same identical firmware in a 32 GB USB key formatted in FAT32 used an upgrade tutorial from the green menu... The installation started and i could see the (remove/install) steps scrolling by. Then at the automatic restart always the same I connected VCP cable and go to (5F) with passcode and engineer mode but cannot read eeprom by OBD Opening the MMI to read the eeprom and modifying it would be the final solution ? Thank you and sorry with my adventure. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content