Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ICOM Firmware (NEXT & A2) always current!
28-02-2022, 20:38 PM,
Post: #21
RE: actual ICOM Firmware (NEXT / A2)
(28-02-2022, 19:36 PM)megalo84 Wrote:  the box for update icom from ista remains gray, it is not selectable

Click the icon next to the house on the top bar, now you will see the "Configure Vehicle Interface" option

I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC
clapping BMW ISPI Admin Client License (Contact for info)
cheers Complete EntryNav2 FSC solution for Retrofit/Component Protection
enjoyKAFAS2 7E/BE/BF KAFAS4 11F/13E/13F
biggrin Carplay activations/FullScreen/ID4-5
rock EntryNav2 Carplay activations OEM/Provisioning
mail Contact me for more information
Quote this message in a reply
[+] 1 user says Thank You to DayvG for this post
28-02-2022, 21:47 PM,
Post: #22
RE: actual ICOM Firmware (NEXT / A2)
(28-02-2022, 20:16 PM)megalo84 Wrote:  it will be a clone, but in the past I could.  with this ISTA version I can't
Which version of .msi you have installed.

Post picture from itoolradar.
Quote this message in a reply
28-02-2022, 22:14 PM,
Post: #23
RE: actual ICOM Firmware (NEXT / A2)
(28-02-2022, 18:58 PM)megalo84 Wrote:  someone can tell me why after installing the .msi update files it gives me the "vehicle interface configuration" box in gray?
thanks
See the PDF.


Attached Files
Box needs to be ticked.pdf
File Type: .pdf
Downloaded: 307 times
Size: 288.53 KB

Quote this message in a reply
28-02-2022, 23:45 PM,
Post: #24
RE: actual ICOM Firmware (NEXT / A2)
solved...
thanks
Quote this message in a reply
27-03-2022, 15:02 PM,
Post: #25
RE: actual ICOM Firmware (NEXT / A2)
The ICOM firmware 3.15.08 is the last official firmware for the original BMW ICOM Next A, right? The newer version, 4.22.xx, hasn't been officially released, or? Does the firmware 3.15.08 actually have a bug or can it be used without any problems? Unfortunately, this question was not finally answered in this thread.
Quote this message in a reply
27-03-2022, 15:28 PM,
Post: #26
RE: actual ICOM Firmware (NEXT / A2)
(27-03-2022, 15:02 PM)Flashdriver Wrote:  The ICOM firmware 3.15.08 is the last official firmware for the original BMW ICOM Next A, right?
Definitely yes!

(27-03-2022, 15:02 PM)Flashdriver Wrote:  The newer version, 4.22.xx, hasn't been officially released, or?
Yes, it is not officially yet approved!

(27-03-2022, 15:02 PM)Flashdriver Wrote:  Does the firmware 3.15.08 actually have a bug or can it be used without any problems?
In the release note describe it.

(27-03-2022, 15:02 PM)Flashdriver Wrote:  Unfortunately, this question was not finally answered in this thread.
You see that clearly.

Vojnó
Press Thanks and reputation under if this post helped you. 
Quote this message in a reply
[+] 2 users say Thank You to Vojno for this post
27-03-2022, 17:00 PM,
Post: #27
RE: actual ICOM Firmware (NEXT / A2)
(27-03-2022, 15:28 PM)Vojno Wrote:  
(27-03-2022, 15:02 PM)Flashdriver Wrote:  Does the firmware 3.15.08 actually have a bug or can it be used without any problems?
In the release note describe it.

Thank you for your answear.

Then it would probably be smarter to install 3.15.06 first and then wait for the final release of 4.22.xx or what do you think?
Quote this message in a reply
27-03-2022, 17:03 PM,
Post: #28
RE: actual ICOM Firmware (NEXT / A2)
It depends on which version of ISTA are you using now.

Vojnó
Press Thanks and reputation under if this post helped you. 
Quote this message in a reply
27-03-2022, 23:56 PM,
Post: #29
RE: actual ICOM Firmware (NEXT / A2)
I am currently using version ISTA+ 4.30.xx, but I would like to update to a higher version soon. If I want to use this version with the original ICOM Next, it shows me "Firmware" as the status. The direct connection still works.
Quote this message in a reply
28-03-2022, 04:55 AM,
Post: #30
RE: actual ICOM Firmware (NEXT / A2)
(27-03-2022, 23:56 PM)Flashdriver Wrote:  I am currently using version ISTA+ 4.30.xx, but I would like to update to a higher version soon. If I want to use this version with the original ICOM Next, it shows me "Firmware" as the status. The direct connection still works.

I am on 4.34.2x with 03-15-08. When I install new version of ISTA I also need to re run the msi for the firmware to clear the update because ISTA think's firmware is old. No need for newer at the moment.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,778 27-03-2024, 05:59 AM
Last Post: hashtagmaster
XZBMW Poor wifi signal from new ICOM's bmchicago 1 137 26-03-2024, 03:04 AM
Last Post: rocdeng
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,905 24-03-2024, 11:29 AM
Last Post: Twointje
  TESTO tool with ICOM Rolzs 5 318 17-03-2024, 20:23 PM
Last Post: Vojno
  please help firmware for ISTA 4.32.15 dmajooo 4 257 12-03-2024, 05:34 AM
Last Post: Stratofortress
  Request xHP 6HP decrypted files and icom flasher tste1982 10 834 05-03-2024, 22:47 PM
Last Post: bradsm87
XZBMW BMW_ISPI_ICOM-FW_03-23-22 & ICOM-Next-FW_04-23-22 shawnsheridan 22 2,380 05-02-2024, 23:47 PM
Last Post: vagrom
XZBMW Firmware genuine ICOMP NEXT emaflo1978 27 4,165 04-02-2024, 17:14 PM
Last Post: cloud9atom
  Connect to MGU via SSH and ICOM anton.maier 1 322 02-02-2024, 04:46 AM
Last Post: VroomVroom
XZBMW how to connect icom remotely? dfb 5 520 29-01-2024, 22:24 PM
Last Post: dfb

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content