Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA-P 3.69.0.400 "Standalone" [DEAD LINK]
14-01-2022, 06:57 AM,
(This post was last modified: 25-01-2022, 23:29 PM by Mrg0721.)
Post: #1
|
|||
|
|||
ISTA-P 3.69.0.400 "Standalone" [DEAD LINK]
***Reposting my previous thread since it was lost***
Below is MEGA link for newest ISTA-P 3.69.0.400. ONLY MEGA LINK AVAILABLE, NOTHING ELSE. I've also included Beemerboy88's newest 6.6L Loader in the rar archive. WinRAR archive was used to compress so I advise to use WinRAR to unzip. Rar file size is 33.33 GB. ***File will only be hosted until 1/21/2022. Then link will be dead*** ***EDIT*** 1/25/2022 - LINK REMOVED |
|||
Reputation: +10 - alexturbo [+1] , flterence [+1] , gpdriver [+1] , maxxsp [+1] , DutchOBD [+1] , schaeublew [+1] , r3mast3r [+1] , bumek [+1] , paui [+1] , adrian1914 [+1] | |||
14-01-2022, 23:18 PM,
Post: #2
|
|||
|
|||
RE: ISTA-P 3.69.0.400 "Standalone" [MEGA LINK]
Thanks.
Testet your versjon tonight but got this errior. Dont know what it means. |
|||
15-01-2022, 00:43 AM,
Post: #3
|
|||
|
|||
RE: ISTA-P 3.69.0.400 "Standalone" [MEGA LINK]
|
|||
15-01-2022, 18:24 PM,
Post: #4
|
|||
|
|||
RE: ISTA-P 3.69.0.400 "Standalone" [MEGA LINK]
(14-01-2022, 06:57 AM)Mrg0721 Wrote: ***Reposting my previous thread since it was lost*** Thank you for sharing! Would it be possible to install your standalone ISTA-P on the same computer already running Sedoy’s ISTA+? |
|||
15-01-2022, 20:27 PM,
Post: #5
|
|||
|
|||
RE: ISTA-P 3.69.0.400 "Standalone" [MEGA LINK]
(15-01-2022, 18:24 PM)maxxsp Wrote:Strange question. Or you don't understand what the word Standalone means? It's the same as portable.(14-01-2022, 06:57 AM)Mrg0721 Wrote: ***Reposting my previous thread since it was lost*** I hope there is no need to explain that portable versions of programs do not affect anything.
|
|||
16-01-2022, 08:20 AM,
Post: #6
|
|||
|
|||
RE: ISTA-P 3.69.0.400 "Standalone" [MEGA LINK]
(15-01-2022, 20:27 PM)Shinoby Wrote:(15-01-2022, 18:24 PM)maxxsp Wrote:Strange question. Or you don't understand what the word Standalone means? It's the same as portable.(14-01-2022, 06:57 AM)Mrg0721 Wrote: ***Reposting my previous thread since it was lost*** There were some threads before the forum was hacked where others had issues with ISTA+ and ISTA-P conflicting when installed on the same computer.... I'm unable to refer to those threads anymore hence my question. |
|||
16-01-2022, 09:53 AM,
Post: #7
|
|||
|
|||
RE: ISTA-P 3.69.0.400 "Standalone" [MEGA LINK]
(16-01-2022, 08:20 AM)maxxsp Wrote:(15-01-2022, 20:27 PM)Shinoby Wrote:(15-01-2022, 18:24 PM)maxxsp Wrote:Strange question. Or you don't understand what the word Standalone means? It's the same as portable.(14-01-2022, 06:57 AM)Mrg0721 Wrote: ***Reposting my previous thread since it was lost*** I installed ISTA/P and patched ediabas to make it work, ISTA Standalone does not communicate with any module anymore |
|||
16-01-2022, 09:59 AM,
Post: #8
|
|||
|
|||
RE: ISTA-P 3.69.0.400 "Standalone" [MEGA LINK]
(16-01-2022, 09:53 AM)dardan Wrote: I installed ISTA/P and patched ediabas to make it work, ISTA Standalone does not communicate with any module anymoreYou didn't give any information to help you. Or do you think everyone has a magic crystal ball to see your monitor, see what you're doing and how you connect, and read your mind.
|
|||
16-01-2022, 10:12 AM,
Post: #9
|
|||
|
|||
RE: ISTA-P 3.69.0.400 "Standalone" [MEGA LINK]
(16-01-2022, 09:59 AM)Shinoby Wrote:(16-01-2022, 09:53 AM)dardan Wrote: I installed ISTA/P and patched ediabas to make it work, ISTA Standalone does not communicate with any module anymoreYou didn't give any information to help you. I was just informing forum members that there is an issue if you install patched ediabas over ista+ standalone. I tested on f10 and there was no communication with any module... VIN was ok, voltage ok but none of ecus where responding. I was thinking to re-install from 0. But any help is appreciated. |
|||
16-01-2022, 15:04 PM,
Post: #10
|
|||
|
|||
RE: ISTA-P 3.69.0.400 "Standalone" [MEGA LINK]
(16-01-2022, 10:12 AM)dardan Wrote:It is not necessary to inform forum members about your problem.(16-01-2022, 09:59 AM)Shinoby Wrote:(16-01-2022, 09:53 AM)dardan Wrote: I installed ISTA/P and patched ediabas to make it work, ISTA Standalone does not communicate with any module anymoreYou didn't give any information to help you. It's your problem only. Because other forum members can use any Ediabas / patched, not patched / over ISTA-D or another program, and everything will work for those who, in addition to clicking on the installation button, will also configure Ediabas. You need to understand what you are doing. If there is no understanding, then remote installation for additional money.
|
|||
Reputation: -1 - bmwcoder75 [-1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content