[Versus]

ODIS-Engineering 12.2 Postsetup 1040 (test) not possible remove CP from gateway (Basis CP all modules) all cars (tested MQB, MEB skoda/VW). All time same java error. All other modules by one are ok.

Also not possible E-golf7 2020 delete DTC from ABS.

[jinyouZ]

ODIS-Engineering 12.2 Postsetup 1040 (test) not possible remove CP from gateway (Basis CP all modules) all cars (tested MQB, MEB skoda/VW). All time same java error. All other modules by one are ok.

Also not possible E-golf7 2020 delete DTC from ABS.

Hello, friend
ODS5003E This error comes from the file "odis. data. GFS Diagnose date n v_900. xxx. 0"
I have tried all versions, and when Brand-V in Postsetup is greater than "odis. data. GFS Diagnosedate n-v_900.152.0", this issue occurs when executing the 060GFF/GFS function. Therefore, you are also considering using ODIS Engineering 12.2 Postsetup 670, as it should not encounter this error!
Thank you very much for Tadk's hard work!

[wxwwxw]

Will this version of ODIS-Engineering work with the DoIP protocol?
Will the BMW ENET (DoIP) cable work with the Skoda Octavia from 2022 on the mqbevo platform with this program?

[RitterDussel]

Yes it will work.