[aportnov]

mate, this is not a support thread for installs of odis and i think that it was stated on 1st post and in title, ODIS-E 12.2 not some other idiot version. So do a proper install then u can come back and complain - u need OffboardDiagSetup-Engineering_12_2_0-0302_2 and not another.

I know how to install and understand what I'm doing. I took the name of the version from the first post. There is a certain version specified, I thought it was a prerequisite.

[Tadk]

Tested 650
The program has been installed, but for some reason it does not see the diagnostic interface. The program says that VAS 6154. If you check through softing, the adapter is visible.However, I installed OffboardDiagSetup-Engineering_12_1_0-0201_19.exe and on top of the postsetup is a test 650. I don't have OffboardDiagSetup-Engineering_12_1_1-0102_2.exe

you just need to enter the name of your version on the command line..

[cb6688999]

Thanks
it work ok 660
vw golf 2018

[tu329]

Engineering 12.2 postsetup 660 test 2012 golf Plus CFHC TDI flash updata error,
ODS05110
Flash re-programming:
The selected flash container 'FL_03L906018AQ_9982.frf' could not be loaded.
The format does not meet the requirement of Specification 'VW 80128-3'for ODX-FLASH containers.

[Tadk]

Engineering 12.2 postsetup 660 test 2012 golf Plus CFHC TDI flash updata error,
ODS05110
Flash re-programming:
The selected flash container 'FL_03L906018AQ_9982.frf' could not be loaded.
The format does not meet the requirement of Specification 'VW 80128-3'for ODX-FLASH containers.

the file must be in the folder:
C:\Program Files (x86)\Offboard_Diagnostic_Information_System_Engineering\datflash

[jhon006]

test Postsetup_120200.302.660 Vw tiguan 2019, 1.5 tsi all Ok

[jhon006]

test 120200.302.660 Audi Q3 2021 TFSI 1.5 DFYA flash DSG, all ok!

[jhon006]

Postsetup_120200.302.660_test Audi Q7 3.0 diesel CASA flash, adapt gearbox ok

[Tadk]

Update_ODIS-Engineering_12.2-EU_Postsetup_120200.302.670_test


TEST! No guarantee!

For those who have experience and ability please check it by working on real cars and please write if you find errors or not.
This is not an official postsetup, so you use it on your own risk.
Corrected to work with Softing 505x interfaces under Engineering 12.2 and updates are from version Engineering 14.2.0-140200.403.40.

Don't spam thread and PM (Private Message) me for password.

Before you start installing Odis from 5054 on Windows 10, you need to do the following:

1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 12.1.1 with the choice of 5054, then specify the postsetup from version 12.2
Attention: if you have installed or are going to install Service,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Service
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

[hestech]

650 working okay with A4 2018