[genautoe]

2012 bmw x6 odo correction help...i need to know where chip is located....and can orange 5 tool do the reading??

[airbone]

Dashoboard - 080dowq chip - on the front side of board (at the side of gauge motors). Need either 080 chips eraser or use new chip with first two lines reset to 00, and original dump/calculate bytes for new value. You also need to rewrite odo in cas, otherwise cluster will sync mileage from cas as soon as mounted back in vehicle.

[genautoe]

Dashoboard - 080dowq chip - on the front side of board (at the side of gauge motors). Need either 080 chips eraser or use new chip with first two lines reset to 00, and original dump/calculate bytes for new value. You also need to rewrite odo in cas, otherwise cluster will sync mileage from cas as soon as mounted back in vehicle.

ok i thank you for reply and info....i think my orange5 tool can read from this 080dowq chip..... can it tho ???? do you know??? and also....please tell me bout the CAS???...is it the same 080dowq chip in the CAS MODULE???  wat is in the CAS MoDule?? and can my little ORANGE FIVE HELP? with the CAS and the 080dowq chip???

[genautoe]

Dashoboard - 080dowq chip - on the front side of board (at the side of gauge motors). Need either 080 chips eraser or use new chip with first two lines reset to 00, and original dump/calculate bytes for new value. You also need to rewrite odo in cas, otherwise cluster will sync mileage from cas as soon as mounted back in vehicle.

ok i thank you for reply and info....i think my orange5 tool can read from this 080dowq chip..... can it tho ???? do you know??? and also....please tell me bout the CAS???...is it the same 080dowq chip in the CAS MODULE???  wat is in the CAS MoDule?? and can my little ORANGE FIVE HELP? with the CAS and the 080dowq chip???

also...where is CAS MODULE LOCATED?

[Chriz]

orange5 and 35080 epprom dont know if he can handle it,
CAS reading/write as far as i know yes, but i dont own this tool.

CAS is located over the GAS Pedal

[rs@chip]

orange 5 is good programer but for cas unfortunaly will not work..35080 will work if its not V-series...beter dont play with this car if not other tools on your hand

[BobbySD]

you have 5M48H/1N35H mcu in cas module. Not sure if orange can do it, maybe yes but you will have to unsolder it.

[airbone]

Tell me first what is the purpose? Do you need to exchange cluster with used that has different mileage or change mileage on entire car?

[genautoe]

change mileage on entire car
i can do the unsoldering and the electrical stuff...i just need to know if the orange five can do the reading/writing of the chips...i only have orange 5 and miniprog tl866cs

[airbone]

I am not using orange at all, so I cannot tell if that programmer is cappable of doing that.... at least on CAS you will need different tool like vvdi2 or vvdi programmer.... can be done by obd i think. But changing mileage on entire car downwards... it is a fraud....