[cubica]

*** DV1.026 A6_4F_2008y_2.0tdi pd_140hp_automatic_EDC16U31_sw391830_DPF_off_OK_all sensores disconnected_no need full bdm. (cuby)

[ROD-BENDERS]

VW edc17c64 adblue bad solution.

More infos please
1. Which car sw numbers ?
2. Davinci 26 or 28 or both ?

Br rb

[asztalos]

Hi people. I just did dpf off + egr off + swirl flaps off on EDC17CP02 engine ecu, BMW X3 E83 is the car, euro4, N47d20A engine code. EGR and Swirl off was ok, but unfortunately for DPF OFF the solution is not good : every time (it doesn't matter if exhaust backpressure sensor is plugged or not) it gives me error on every car start, which remains in HISTORY. It tells me about exhaust backpressure being implausible, error code P14A3. When checked manually, Davinci shows that DTC is OFF but in reality it is not

[ROD-BENDERS]

I tried the dpf off function on bmw e90 my 2008, edc17cp02 engine ecu. It disables dpf BUT only on tester an error appears which says that exhaust back pressure sensor value is outside tolerance. Tried to remove this DTC manually using Davinci but surprise : this dtc was already "removed" by the program. Car works but testing it gives you dtc

@Asztalos

1. I do not recall sending you a pass for my download and without a +rep from you I would not have sent you the password. Where did you get the pass ?

2. Make a seperate thread for this and post your file on it. 
3. Explain all the steps you have taken, for example, is the dpf removed from the exhaust ? Did you reset dpf with ori file before you write the file, were there any broken sensors etc but not here; do it  in a seperate thread.

RB

@asztalos 
I dealt with your last post a few months back.... next time you will get a warning.


Deja vu ?

[Rudkinp]

Thanks and rep given but no response to PM

[firas]

CRD2 Solution is working.

[ROD-BENDERS]

Thanks and rep given but no response to PM

I cant see it 

Br

Rb