Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ PROBLEM INITIALIZING ZGW02 4SK
|
29-01-2023, 11:34 AM,
Post: #1
|
|||
|
|||
PROBLEM INITIALIZING ZGW02 4SK
Hello, I have a BMW F26 to which I installed a new EPS ECU. As the ECU was not detected in Esys, I had to open the port in ZGW02 4sk with Tools32. Once I did, everything worked fine. The problem is that now I get an error in ista d to initialize ZGW and when I do so the port is closed again. Is there a way to open the port permanently? If I had to flash ZGW 02 8sk, does anyone know which swfl and hwel files I have to put? Thank you all
|
|||
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
29-01-2023, 11:54 AM,
(This post was last modified: 29-01-2023, 11:55 AM by ____ANGEL___.)
Post: #2
|
|||
|
|||
|
RE: PROBLEM INITIALIZING ZGW02 4SK
if all is original from car, correct your svt and you're done
![[Image: GIF-Bandiera-Italiana.gif]](https://i.postimg.cc/dtmdcJMn/GIF-Bandiera-Italiana.gif) |
|||
|
29-01-2023, 16:20 PM,
Post: #3
|
|||
|
|||
|
RE: PROBLEM INITIALIZING ZGW02 4SK
|
|||
|
29-01-2023, 16:33 PM,
Post: #4
|
|||
|
|||
|
RE: PROBLEM INITIALIZING ZGW02 4SK
calculate your svt like in a flashing procedure with esys and use expert mode vcm to store new svt in master and backup
|
|||
| Reputation: +1 - simzep [+1] | |||
|
29-01-2023, 20:12 PM,
Post: #5
|
|||
|
|||
|
RE: PROBLEM INITIALIZING ZGW02 4SK
|
|||
|
29-01-2023, 21:10 PM,
Post: #6
|
|||
|
|||
|
RE: PROBLEM INITIALIZING ZGW02 4SK
Don‘t need to flash. Open port with tool32 then reset _learn_flexray over tool32. After that vo code eps and init flexray with ISTA
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
|
29-01-2023, 21:28 PM,
(This post was last modified: 29-01-2023, 22:02 PM by ricarpa.)
Post: #7
|
|||
|
|||
RE: PROBLEM INITIALIZING ZGW02 4SK
(29-01-2023, 21:10 PM)Siki78 Wrote: Don‘t need to flash. Open port with tool32 then reset _learn_flexray over tool32. After that vo code eps and init flexray with ISTAI am going to try right now what you propose and I will tell you. Thank you (29-01-2023, 21:28 PM)ricarpa Wrote:I have done what you have told me and when I initialize ZGW with Ista it closes the port again and does not read the EPS module. Thank You(29-01-2023, 21:10 PM)Siki78 Wrote: Don‘t need to flash. Open port with tool32 then reset _learn_flexray over tool32. After that vo code eps and init flexray with ISTAI am going to try right now what you propose and I will tell you. Thank you |
|||
|
30-01-2023, 08:17 AM,
Post: #8
|
|||
|
|||
|
RE: PROBLEM INITIALIZING ZGW02 4SK
If you want I can try it for free of course. Write me pm
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
|
04-02-2023, 12:36 PM,
Post: #9
|
|||
|
|||
|
RE: PROBLEM INITIALIZING ZGW02 4SK
Many thanks to Siki78 for his disinterested help. The problem is solved
|
|||
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Bmw G31 retrofit Mgu id7 atm problem | intranet | 19 | 2,255 |
15-04-2024, 09:21 AM Last Post: evaldazj |
|
| BMW E60 coding problem | GarageX | 8 | 347 |
02-04-2024, 10:07 AM Last Post: GarageX |
|
|
|
Bmw 5,f10 radio problem | RobertRexhaj | 3 | 152 |
28-03-2024, 18:47 PM Last Post: Unspec |
| ISTA launcher problem | Red_bean_bun | 1 | 244 |
26-03-2024, 05:11 AM Last Post: 2013m5 |
|
| Dme Cas synchronization Problem | donjuan020 | 3 | 264 |
25-03-2024, 21:55 PM Last Post: BmwMerc |
|
| BMW e39 530d 2001 problem after MAF change | boweld11 | 3 | 159 |
24-03-2024, 22:44 PM Last Post: SkeYT |
|
|
|
Entrynav2 Maps Problem | Chillmeister | 3 | 350 |
24-03-2024, 17:18 PM Last Post: Chillmeister |
| For anyone having problem with ICOM NEXT FW update via ISTA+. | ImmBoo | 16 | 4,125 |
24-03-2024, 11:29 AM Last Post: Twointje |
|
| Battery lead positive underfloor problem | da.2022 | 10 | 292 |
24-03-2024, 09:38 AM Last Post: pupu144 |
|
| Problem Retrofit electrified steering column on the G31 LCI | smercki | 12 | 483 |
22-03-2024, 12:55 PM Last Post: Node |
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
